Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 1022 — Trang 6/13

Code: 611

Description: Communication break error between SBCU and ADF
The SBCU receives a break signal from the ADF main board.
Causes: • Serial line connecting SBCU and ADF unstable • External noise • ADF main board defective • SBCU board defective

Code: 612

Description: Communication command error between SBCU and ADF
The SBCU sends a command to the ADF main board that it cannot execute.
Causes: • SBCU board defective • Download SBCU firmware again

Code: 620

Description: Communication timeout error between SBCU and finisher
The SBCU cannot receive a response within 100 ms after 3 attempts after sending data to the finisher.
Causes: • Serial line connecting SBCU and finisher unstable • External noise • SBCU board and finisher main board connection defective or loose • Finisher main board defective • SBCU board defective

Code: 621

Description: Communication timeout error between SBCU and finisher
A break (low) signal was received from the finisher.
Causes: • Serial line connecting SBCU and finisher unstable • External noise

Code: 630

Description: Communication failure with CSS (RSS)
The communication from the copier was detected as abnormal at the CSS center. This error occurs when the acknowledge signal from the LADP does not complete normally.
Causes: • Occurred with an SC call, CC call, supply management call, user call, or CE call. • Timeout while no response from the LADP, and abnormal signal on the RS-485 line between PI and LADP.

Code: 640

Description: SBCU control data transfer checksum error
A sampling of control data sent from the SBCU to the controller reveals a checksum error. Only the logging count is performed.
Causes: • Controller board defective • External noise • SBCU board defective

Code: 641

Description: SBCU control data transfer abnormal
A sampling of the control data sent from the SBCU reveals an abnormality.
Causes: • Controller board defective • External noise • SBCU board defective

Code: 650

Description: Communication timeout error between SBCU and duplex unit
The SBCU cannot receive a response within 1 second from the duplex unit.
Causes: • Serial line connecting SBCU and duplex unit unstable • External noise • SBCU board and duplex main board connection defective or loose • Duplex main board defective • SBCU board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie