Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 1027 — Trang 5/13

Code: 541

Description: Fusing thermistor open
The fusing temperature detected by the thermistor was below 0 °C for 5 seconds. The fusing temperature does not rise +15 °C (center) or +12 °C (at the ends) five times within 2 minutes after the fusing lamps have been turned on.
Causes: • Fusing thermistor defective or out of position • Fusing lamp open • Fusing thermostat open • Power supply board defective • Poor connection of the fusing unit

Code: 542

Description: Fusing temperature warm-up error
The fusing temperature does not reach the standby temperature within 20 seconds after the main switch is turned on.
Causes: • Fusing thermistor defective or out of position • Fusing lamp open • Fusing thermostat open • Power supply board defective • Poor connection of the fusing unit

Code: 543

Description: Fusing overheat error 1
A fusing temperature of over 231°C is detected for 5 second by the fusing thermistor.
Causes: • Fusing thermistor defective • Power supply board defective • SBCU board defective

Code: 544

Description: Fusing overheat error 2
A fusing temperature of over 251°C is detected by the fusing temperature monitor circuit in the SBCU board.
Causes: • Fusing thermistor defective • Power supply board defective • SBCU board defective

Code: 546

Description: Unstable fusing temperature
The fusing temperature varies 50°C or more within 1 second twice continuously.
Causes: • Thermistor defective • Poor connection of the fusing unit • Power supply unit defective

Code: 547

Description: Zero cross signal malfunction
Zero cross signals are not detected within a certain period.
Causes: • Power supply board defective • SBCU board defective

Code: 548

Description: Fusing unit set error
The machine does not detect the fusing unit.
Causes: • Poor connection of the fusing unit • The fusing unit is not installed

Code: 590

Description: Exhaust fan motor error
The CPU detects an exhaust fan lock signal for more than 5 seconds.
Causes: • Poor connection of the exhaust fan motor • Too much load on the motor drive
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie