Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 1032 — Trang 7/13

Code: 670

Description: Engine response error
After powering on the machine, a response is not received from the engine within 30 seconds.
Causes: • SBCU installed incorrectly • SBCU defective • Controller board defective

Code: 672

Description: Controller-to-operation panel communication error at startup
After powering on the machine, the communication circuit between the controller and the operation panel is not opened, or communication with controller is interrupted after a normal startup.
Causes: • Controller stall • Controller board installed incorrectly • Controller board defective • Operation panel connector loose or defective

Code: 720

Description: Finisher jogger motor error (500-sheet finisher)
The finisher jogger H.P sensor remains de-activated for a certain time when returning to home position. The finisher jogger H.P sensor remains activated for a certain time when moving away from home position.
Causes: • Jogger H.P sensor defective • Jogger motor defective

Code: 722

Description: Finisher jogger motor error (1000-sheet finisher)
The finisher jogger H.P sensor remains de-activated for a certain time when returning to home position. The finisher jogger H.P sensor remains activated for a certain time when moving away from home position.
Causes: • Jogger H.P sensor defective • Jogger motor defective

Code: 724

Description: Finisher staple hammer motor error (1000-sheet finisher)
Stapling does not finish within 600 ms after the staple hammer motor turned on.
Causes: • Staple jam • Stapler overload caused by trying to staple too many sheets • Staple hammer motor defective

Code: 725

Description: Finisher stack feed-out motor error (1000-sheet finisher)
The stack feed-out belt H.P sensor does not activate within a certain time after the stack feed-out motor turned on.
Causes: • Stack feed-out H.P sensor defective • Stack feed-out motor defective

Code: 726

Description: Finisher lift motor error (1000-sheet finisher)
The stack height sensor does not activate within a certain time after the shift tray lift motor turned on.
Causes: • Shift tray lift motor defective • Stack height sensor defective

Code: 727

Description: Finisher staple hammer motor error (500-sheet finisher)
Stapling does not finish within a certain time after staple hammer motor turned on.
Causes: • Staple jam • Stapler overload caused by trying to staple too many sheets • Staple hammer motor defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie