Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 1105 — Trang 10/18

Code: SC510

Description: Paper feed motor locks
• The lock signal from the paper feed motor is detected for 3,000 ms during rotation. • Poor connection is checked once when the main switch is on.
Causes: • Paper feed motor defective or poor connection • Too much load on the drive mechanism • Lower front door safety switch defective • Lower front door safety switch bracket deformation

Code: SC511

Description: LCT motor lock (optional LCT)
• The lock signal from the LCT transport motor is detected for 50 ms during rotation. (The detection period does not include 300 ms of the starting up.) • Poor connection is checked once when the main switch is on.
Causes: • LCT transport motor defective or poor connection • Too much load on the drive mechanism

Code: SC515

Description: Tandem rear fence motor error
• When the tray is pushed in, the rear fence return sensor and the rear fence HP sensor are already on. • The rear fence return sensor is not on within 10 seconds after the rear fence motor starts. • The rear fence HP sensor is not on within 10 seconds after the rear fence starts moving to the home position.
Causes: • Rear fence motor defective or poor connection • Too much load on the drive mechanism <Note> The other trays are still available to use.

Code: SC516

Description: Tandem side fence motor error
Japanese version only
Causes:

Code: SC520

Description: Duplex jogger motor error 1
When the jogger fence moves to the home position, the jogger HP sensor does not turn on even if the jogger fence motor has moved the jogger fence 153.5 mm.
Causes: • Jogger fence motor defective or poor connection • Too much load on the drive mechanism

Code: SC521

Description: Duplex jogger motor error 2
When the jogger fence moves from the home position, the jogger fence HP sensor does not turn off even if the jogger motor has moved the jogger fence 153.5 mm.
Causes: • Jogger fence motor defective or poor connection • Too much load on the drive mechanism

Code: SC530

Description: By-pass feed motor lock
A by-pass feed motor lock signal is detected for more than 2 seconds during rotation.
Causes: • By-pass feed motor defective or poor connection • Too much load on the drive mechanism

Code: SC531

Description: Fusing/duplex motor lock
A fusing/duplex motor lock signal is detected for more than 2 seconds during rotation.
Causes: • Fusing/duplex motor defective or poor connection • Too much load on the drive mechanism
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie