Description: Charge corona unit disconnection
The supply to the charge corona unit is continuously output. → The unit operates at the maximum PWM duty value for 60 milliseconds
Causes: • Defective PCU installation (OPC belt) • Defective high voltage supply board • Defective harness (BICU -high voltage supply board)
Description: Charge grid electrical leak
The supply to the charge grid is continuously output. → The returning voltage exceeds the target by 0.5 Volt or more for 120 milliseconds.
Causes: • Defective PCU installation (OPC belt) • Short circuit in the charge grid • Defective high voltage supply board • Defective harness (BICU -high voltage supply board)
Description: Charge corona unit cleaner error
• Cleaning starts. → The lock signal is not detected within 30 seconds. • Cleaning starts. → The cleaner starts to turn. → The lock signal is detected within 6 seconds. • The lock signal is detected while the unit is moving away from the home position. → The next lock signal is detected within 6 seconds after the unit has turned toward the home position.
Causes: • Defective PCU installation (OPC belt) • Defective cleaner • Incorrect charge corona unit installation • Toner fallen into the cleaner drive mechanism
Description: Development error 1 (K/Y)
A development process starts. → The returning voltage exceeds the target by 0.5 Volt or more for 60 milliseconds.
Causes: • Short circuit in the development unit • Defective high voltage supply board • Defective harness (BICU -high voltage supply board)
Description: Development error 2 (C/M)
A development process starts. → The returning voltage exceeds the target by 0.5 Volt or more for 60 milliseconds.
Causes: • Short circuit in the development unit • Defective high voltage supply board • Defective harness (BICU -high voltage supply board)
Description: Development motor error
• The development motor starts or changes speed. → The motor does not detect a 1-second lock signal within 3 seconds. • The development motor starts. → The lock signal is detected during normal operation. → The lock signal is interrupted for 1 second or more.
Description: 1st transfer (image transfer) electric leakage (+)
Image transfer starts. → The process operates at the minimum PWM duty value. The returned current exceeds 1.8 V for 180 milliseconds.
Causes: • Short circuit in the image transfer unit • Defective image transfer belt • Defective high voltage supply board • Defective harness (BICU -high voltage supply board)
Description: 1st transfer (image transfer) electric leakage (–)
Image transfer starts. → The negative (–) output is at the maximum PWM duty value for 60 milliseconds.
Causes: • Short circuit in the image transfer belt • Defective high voltage supply board • Defective harness (BICU -high voltage supply board)
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.