Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 3224C — Trang 9/17

Code: 641

Description: Engine-to-controller response error
The controller has sent a frame with the RAPI protocol, but the engine does not respond.
Causes: • Defective controller board • External noise

Code: 670

Description: Engine startup error
Just after the main power is turned on or the machine is recovering from auto off mode, the engine ready signal assertion fails. Just after the main power is turned on, the engine does not respond.
Causes: • Defective BICU • Defective controller board

Code: 672

Description: Controller-to-operation panel communication error at startup
After powering on the machine, communication between the controller and operation panel does not begin, or the communication is interrupted after a normal startup.
Causes: • Controller stalled • Controller board installed incorrectly • Defective controller board • Operation panel connector loose or defective • Poor connection of DIMM and optional boards on the controller board

Code: 685

Description: SBU/IPU communication error
While data is sent between the scanner and BICU board, a communication error has occurred.
Causes: • Defective scanner unit cable • Defective SBU board • Defective BICU board

Code: 687

Description: PER command error
Some image data is transferred. The controller does not report the necessary memory address.
Causes: • Poor connection between BICU and controller • Defective BICU • Defective controller

Code: 720

Description: Finisher jogger motor error (500-sheet finisher)
• The finisher jogger H.P sensor remains de-activated for a certain time when returning to home position. • The finisher jogger H.P sensor remains activated for a certain time when moving away from home position.
Causes: • Jogger HP sensor defective • Jogger motor defective • Defective finisher control board • Defective BICU • Defective IOB • Incorrect installation

Code: 722

Description: Finisher jogger motor error (1000-sheet finisher)
The finisher jogger H.P sensor remains de-activated for a certain time when returning to home position. The finisher jogger H.P sensor remains activated for a certain time when moving away from home position.
Causes: • Jogger HP sensor defective • Jogger motor defective • Defective finisher control board • Defective BICU • Defective IOB • Incorrect installation

Code: 724

Description: Finisher staple hammer motor error (1000-sheet finisher)
Stapling hammer motor jam is detected consecutively twice after the staple hammer motor turned on.
Causes: • Staple jam • Stapler overload caused by trying to staple too many sheets • Staple hammer motor defective • Stapler home position sensor defective • Defective finisher control board • Defective BICU • Defective IOB • Incorrect installation
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie