Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 3260C — Trang 26/31

Code: SC770

Description: Cover interposer tray bottom plate motor error
• After the motor starts to raise the bottom plate, the bottom plate position sensor does not detect the plate at the specified time (3 s). • After the motor starts to lower the bottom plate, the bottom plate HP sensor does not detect the bottom plate.
Causes: • Bottom plate position sensor, disconnected, defective • Bottom plate HP sensor disconnected, defective

Code: SC775

Description: Cover interposer tray feed motor
Causes: • Motor harness disconnected, loose, defective • Motor overload • Motor defective

Code: SC790

Description: Finisher staple waste hopper full
The staple waste hopper is full of cut staples.
Causes: • If the hopper is full, empty the hopper • If the hopper is not full, the hopper full sensor is disconnected, defective

Code: SC817

Description: Boot loader error
The boot loader cannot read one of the following: self-diagnostic module, kernel, or one of the files of the root file system, or the check of one of these items on the system SD card failed.
Causes: • File or module on the system SD card is corrupted • File or module on the system SD card is illegal • Make sure that the system SD card is the one designed for the machine • Replace system ROM on the controller board

Code: SC818

Description: Watchdog error
While the system program is running, a bus hold or interrupt program goes into an endless loop, preventing any other programs from executing.
Causes: • System program defective; switch off/on, or change the controller firmware if the problem cannot be solved • Controller board defective • Controller option malfunction

Code: SC819

Description: Fatal kernel error
Due to a control error, a RAM overflow occurred during system processing. One of the following messages was displayed on the operation panel.
Causes: • System program defective • Controller board defective • Optional board defective • Replace controller firmware

Code: SC821

Description: Self-diagnostic error 2: ASIC
The ASIC provides the central point for the control of bus arbitration for CPU access, for option bus and SDRAM access, for SDRAM refresh, and for management of the internal bus gate.
Causes: • ASIC (controller board defective)

Code: SC822

Description: Self-diagnostic error 3: HDD
Causes: • HDD defective • HDD harness disconnected, defective • Controller board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie