Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 3260C — Trang 2/31

Code: SC195

Description: Machine serial number error
The number registered for the machine serial number does not match.
Causes: • Confirm the correct serial number of the machine in the specifications

Code: SC202

Description: Polygon motor error 1: ON timeout
The polygon mirror motor does not reach the targeted operating speed: • Within 10 seconds after turning on. • Within 10 sec. after changing speed
Causes: • Harness to polygon motor driver board disconnected, defective • Polygon motor defective • Polygon motor driver board defective • Polygon motor defective.

Code: SC203

Description: Polygon motor error 2: OFF timeout
The polygon mirror motor does leave the READY status within 10 seconds after the polygon motor switches off.
Causes: • Harness to polygon motor driver board disconnected, defective • Polygon motor defective • Polygon motor driver board defective • Polygon motor defective.

Code: SC204

Description: Polygon motor error 3: XSCRDY signal error
The SCRDY_N signal goes HIGH (inactive) while the laser diode is firing.
Causes: • Harness to polygon motor driver board disconnected, defective • Polygon motor defective • Polygon motor driver board defective

Code: SC205

Description: Polygon motor error 4: XSCRDY signal unstable
When the polygon motor switches on, or after the speed of the motor changes, the SCRDY_N signal goes HIGH (inactive).
Causes: • Harness to polygon motor driver board disconnected, defective • Polygon motor defective • Polygon motor driver board defective

Code: SC210

Description: Laser beam detection error 1: K (Black)
The laser synchronization sensor failed to detect the beginning and end of the laser beam flash for the designated color onto the polygon mirror while the mirror is rotating at the prescribed number of revolutions.
Causes: • Laser synchronization detector sensor connection loose, not connected • Laser synchronization detector sensor defective

Code: SC211

Description: Laser beam detection error 1: Y (Yellow)
The laser synchronization sensor failed to detect the beginning and end of the laser beam flash for the designated color onto the polygon mirror while the mirror is rotating at the prescribed number of revolutions.
Causes: • Laser synchronization detector sensor connection loose, not connected • Laser synchronization detector sensor defective

Code: SC212

Description: Laser beam detection error 1: M (Magenta)
The laser synchronization sensor failed to detect the beginning and end of the laser beam flash for the designated color onto the polygon mirror while the mirror is rotating at the prescribed number of revolutions.
Causes: • Laser synchronization detector sensor connection loose, not connected • Laser synchronization detector sensor defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie