• Code: SC725
• Description: Finisher Stack Feed-out Motor Error Definition [B] The stack feed-out belt H.P sensor does not activate within a certain time after the stack feed-out motor turned on.
• Causes: Possible Causes · Stack feed-out H.P sensor defective · Stack feed-out motor defective

• Code: SC726
• Description: Finisher Shift/Lift Motor Error Definition [B] 1) Tray shift does not finish within a certain time after the shift motor turned on. 2) The stack height sensor does not activate within a certain time after the shift tray lift motor turned on.
• Causes: · Shift motor defective · Shift tray lift motor defective

• Code: SC727
• Description: Finisher Stapler Rotation Motor Error Definition [B] 1) Stapler rotation does not finish within a certain time after the staple rotation motor turned on. 2) The stapler does not return to its home position within a certain time after stapling finished.
• Causes: · Stapler rotation motor defective · Poor stapler rotation motor connection

• Code: SC729
• Description: Finisher Punch Motor Error Definition [B] The punch H.P sensor does not activate within a certain time after the punch motor turned on.
• Causes: · Punch motor defective · Punch H.P sensor defective · Poor punch motor connection

• Code: SC730
• Description: Finisher Stapler Position Motor Error Definition [B] 1) The stapler home position sensor stays on for longer than normal when the stapler motor turns on to return the stapler to its home position. 2) The stapler H.P sensor does not turn on within a certain time after the stapler motor turned on to move the stapler away from home position.
• Causes: · Stapler motor defective · Stapler H.P sensor defective · Poor stapler motor connection

• Code: SC900
• Description: Electrical Total Counter Error Definition [A] The total counter contains a character that is not a number.
• Causes: · NVRAM defective

• Code: SC951
• Description: F-Gate Signal Error 2 Definition [B] When the IPU has already received the F-gate signal, the IPU receives another F-gate signal.
• Causes: · BICU defective

• Code: SC954
• Description: Printer Image Setting Error Definition [B] The settings that are required for image processing using the printer controller are not sent from the IPU.
• Causes: · Software defective