Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio Color 5106 — Trang 4/12

Code: SC346

Description: Color-development motor lock - Definition - [B] The Color-development motor lock signal is detected for more than 3 seconds.
Causes: • Color-development motor defective or poor connection • Too much load on one of the C/M/Y-development sections • Interface board 1 defective or poor connection (CN708) • Main control board defective

Code: SC350

Description: Bk-TD sensor initial setting error - Definition - [B] TD sensor output (Vt) does not reach a value between 2.4 and 2.6 V when performing the toner density initial setting.
Causes: • TD sensor defective • Main control board defective • Developer not distributed evenly

Code: SC351

Description: Y-TD sensor initial setting error - Definition - [B] TD sensor output (Vt) does not reach a value between 2.4 and 2.6 V when performing the toner density initial setting.
Causes: • TD sensor defective • Main control board defective • Developer not distributed evenly

Code: SC352

Description: M-TD sensor initial setting error - Definition - [B] TD sensor output (Vt) does not reach a value between 2.4 and 2.6 V when performing the toner density initial setting.
Causes: • TD sensor defective • Main control board defective • Developer not distributed evenly

Code: SC353

Description: C-TD sensor initial setting error - Definition - [B] TD sensor output (Vt) does not reach a value between 2.4 and 2.6 V when performing the toner density initial setting.
Causes: • TD sensor defective • Main control board defective • Developer not distributed evenly

Code: SC354

Description: Bk-TD sensor gain adjustment error - Definition - [B] When adjusting TD sensor gain during the toner density initial setting, Vcnt (output voltage) does not reach a value between 7 and 11 V.
Causes: • Main control board defective

Code: SC355

Description: Y-TD sensor gain adjustment error - Definition - [B] When adjusting TD sensor gain during the toner density initial setting, Vcnt (output voltage) does not reach a value between 7 and 11 V.
Causes: • Main control board defective

Code: SC356

Description: M-TD sensor gain adjustment error - Definition - [B] When adjusting TD sensor gain during the toner density initial setting, Vcnt (output voltage) does not reach a value between 7 and 11 V.
Causes: • Main control board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie