Danh mục sản phẩm

Code :

Code: SC174
Description: Scanner DA2* abnormal - Definition - [B] When performing the AGC, DA2* is not in the proper range.
Causes: • Poor connection between CCD board and scanner control board • Scanner control board defective • CCD board defective

Code: SC191
Description: Bar code scanning error - Definition - [B] The bar code for the machine identification number cannot be detected when the AGC is performed after the main switch is turned on.
Causes: • The bar code label is dirty. • Scanner mirrors are not in position

Code: SC192
Description: Bar code number is different - Definition - [B] The bar code number is not identical to the machine identification number stored in memory.
Causes: • Wrong machine identification number in memory • Machine identification number is not entered in the new (replaced) RAM board • RAM board defective • Main control board defective

Code: SC193
Description: IDU connection error - Definition - [B] IDU connection cannot be detected.
Causes: • IDU is disconnected • IDU defective

Code: SC194
Description: IDU detection error - Definition - [B] IDU detection error
Causes: • IDU defective

Code: SC302
Description: Charge current leak - Definition - [B] A charge current leak signal is detected for more than 3 seconds.
Causes: • Charge corona end block damaged • Charge corona receptacle damaged • High voltage supply board - C/G defective

Code: SC303
Description: Wire cleaner motor error - Definition - [B] Over current signal is detected for more than 10 seconds, when the wire cleaner motor rotates.
Causes: • Wire cleaner motor defective • Wire cleaner drive board defective • Wire cleaner pad unit not properly positioned

Code: SC320
Description: Polygon motor lock - Definition - [B] The polygon motor lock signal is detected for more than 3 seconds.
Causes: • Polygon motor defective • Polygon motor drive board defective • Scanner control board defective

< 1 2 3 4 5 > Last ›

0