Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio Color 6110 — Trang 11/11

Code: SC731

Description: Sorter: Staple unit motor error - Timing & Condition - The staple unit H.P. sensor does not activates within the timing programmed. When this error detected twice, this SC code is displayed.
Causes: • Poor connection of connectors. • Defective staple unit H.P. sensor • Defective grip shift motor • Defective main board
Remedy: 1. Check if the connectors of the staple unit H.P. sensor and/or staple unit motor are properly connected. 2. Replace the staple unit motor H.P. sensor. (Input check: SP 5-803-130) 3. Replace the staple unit motor. (Output check: SP 5- 804-128) 4. Replace the main board.

Code: SC741

Description: LCT: Main motor error - Timing & Condition - • LCT main motor speed is out of range for more than 0.5 seconds during rotation.
Causes: • Poor connection of connectors • Defective LCT main motor • Defective LCT main board
Remedy: 1. Check if the connector is properly connected. 2. Replace the LCT main motor.

Code: SC742

Description: LCT: Tray lift error - Timing & Condition - • The upper limit sensor does not activate within 18 seconds after the lift motor turns on (in UP direction) when the main switch is turned on or close the LCT cover. • The lower limit sensor does not activate within 18 seconds after the lift motor turns on (in DOWN direction) when paper runs out (paper end) or the Down key is pressed.
Causes: • Poor connection of connectors • Defective lift motor • Defective upper limit sensor • Defective pick-up solenoid • Defective LCT main board
Remedy: 1. Check if the connectors of the lift motor, upper limit sensor, and pick-up solenoid are properly connected. 2. Replace the lift motor. 3. Replace the upper limit sensor. 4. Replace the pick-up solenoid. 5. Replace the LCT main board

Code: SC790

Description: FPU: Projector lamp on error - Timing & Condition - The projector lamp does not turns on 100msec after 5V is applied to it.
Causes: • Poor connection of connector • Blown projector lamp • Defective projector main board
Remedy: 1. Check if the connector is properly connected. 2. Replace the projector lamp if it is blown. 3. Replace the projector main board.

Code: SC791

Description: FPU: Projector lamp off error - Timing & Condition - The projector lamp does not turns off 100msec after it is turned off.
Causes: • Defective projector main board • Defective sub/main scanner IPU board • Defective main control board
Remedy: 1. Replace the projector main board. 2. Replace the sub and/or main scanner IPU board. 3. Replace the main control board.

Code: SC792

Description: FPU: Projector lamp overheated - Timing & Condition - The projector lamp overheats during projector operation.
Causes: • Poor connection of connector • Defective thermistor • Defective projector main board
Remedy: 1. Check if the connector of the fan is properly connected. 2. Replace the fan if it is defective. 3. Replace the thermistor if it is defective. 4. Replace projector main board.

Code: SC901

Description: Upper total counter error (Black) - Timing & Condition - • Feedback signal stays LOW when the main switch is turned on. • Feedback signal stays LOW just before the trigger signal goes ON. • Feedback signal stays HIGH just before the trigger signal goes OFF.
Causes: • Poor connection of the connectors • Defective counter
Remedy: Check if the connectors are properly set. Replace the total counter. [ Signal Check ] Trigger line: CN230-B8 on I/O control board Counter OK signal: TP227 on I/O control Board

Code: SC902

Description: Lower total counter error (Color) Timing & Condition - • Feedback signal stays LOW when the main switch is turned on. • Feedback signal stays LOW just before the trigger signal goes ON. • Feedback signal stays HIGH just before the trigger signal goes OFF.
Causes: • Poor connection of the connectors • Defective counter
Remedy: Check if the connectors are properly set. Replace the total counter. [ Signal Check ] Trigger line: CN230-B10 on I/O control board Counter OK signal: TP228 on I/O control board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie