Description: Finisher communication error • Detected an error when connecting the communication line. • Received a communication error notification from the URAT.
Causes: • Finisher control board defective. • BCU defective • Connection fault between finisher and main machine.
Remedy: • Reconnect the Finisher interface cable • Replace the BCU • Replace the finisher • Turn the power off/on
Description: Paper bank communication error • Detected an error when connecting the communication line. • Received a communication error notification from the URAT.
Causes: • Paper bank control board defective • BCU defective • Paper bank-main machine connection fault
Remedy: • Reconnect the optional paper tray connection cable • Replace the BCU • Replace the optional paper tray • Turn the power off/on
Description: Counter device error 1 After 3 attempts to send a data frame to the optional counter device via the serial communication line, no ACK signal was received within 100 ms.
Causes: Serial line between the optional counter device, the relay board and copier control board is disconnected or damaged.
Remedy: • Turn the main power off/on. • Check the serial communication line.