• Code: SC816-29
• Description: read() communication retry error
• Causes: Energy save I/O subsystem detected some abnormality. • Energy save I/O subsystem defective • Energy save I/O subsystem detected a controller board error (non-response). • Error was detected during preparation for transition to STR.
• Remedy: • Turn the main power off/on. • Replace the controller board.

• Code: SC816-35
• Description: read() error
• Causes: Energy save I/O subsystem detected some abnormality. • Energy save I/O subsystem defective • Energy save I/O subsystem detected a controller board error (non-response). • Error was detected during preparation for transition to STR.
• Remedy: • Turn the main power off/on. • Replace the controller board.

• Code: SC816-36
• Description: Subsystem error
• Causes: Energy save I/O subsystem detected some abnormality. • Energy save I/O subsystem defective • Energy save I/O subsystem detected a controller board error (non-response). • Error was detected during preparation for transition to STR.
• Remedy: • Turn the main power off/on. • Replace the controller board.

• Code: SC841-00
• Description: EEPROM read data error Compared the data from 3 areas of the EEPROM mirror data with the original data and all 3 of them were different from the original data.
• Causes: Data in the specific area of the EEPROM has been modified.
• Remedy:

• Code: SC842-00
• Description: Nand-Flash updating verification error During remote ROM update or ROM update, the SCS detected a write error (verify error) regarding the data written to the Nand-Flash.
• Causes: Nand-Flash damaged
• Remedy: Turn the main power off/on.

• Code: SC842-01
• Description: Nand-Flash bad block number exceeding the threshold When the status of the Nand-Flash was checked at power-on or when returning from energy saver mode, the number of bad blocks exceeded the threshold.
• Causes: Nand-Flash bad block number exceeding the threshold
• Remedy: Replace the controller board.

• Code: SC842-02
• Description: Number of times of Nand-Flash block erase exceeding the threshold When the status of the Nand-Flash was checked at power-on or when returning from energy saver mode, the number of times the block was erased exceeded the threshold.
• Causes: Number of times of Nand-Flash block erase exceeding the threshold
• Remedy: Replace the controller board.

• Code: SC853-00
• Description: Bluetooth device connection error The Bluetooth hardware (USB type) was connected after the machine was turned on.
• Causes: The Bluetooth hardware (USB type) was connected after the machine was turned on.
• Remedy: Turn the main power with the Bluetooth hardware (USB type) connected.