• Code: SC859-01
• Description: Data encryption conversion HDD conversion error (HDD check error) HDD was not converted correctly during an attempt to update the encryption key. Only an error screen is displayed and no SC is issued during conversion. This SC is issued after machine restart.
• Causes: • HDD conversion was selected in the Encryption key update function but the machine was turned on with the HDD removed. • Power failure occurred during encryption key update. • HDD was not successfully converted during encryption key update due to HDD errors or cable noises.
• Remedy: • Check HDD connection. • Format the HDD. • If there is a problem with the HDD, it has to be replaced.

• Code: SC859-02
• Description: Data encryption conversion HDD conversion error (Power failure during conversion) HDD was not converted correctly during an attempt to update the encryption key. Only an error screen is displayed and no SC is issued during conversion. This SC is issued after machine restart. Details: NVRAM/HDD conversion is incomplete.
• Causes: Power failure occurred during encryption key update.
• Remedy: The display after restart instructs the user to format the HDD.

• Code: SC859-10
• Description: Data encryption conversion HDD conversion error (Data read/write command error) HDD was not converted correctly during an attempt to update the encryption key. Only an error screen is displayed and no SC is issued during conversion. This SC is issued after machine restart. Details: Abnormal DMAC return value has been received two or more times (DMAC timeout, serial communication error etc.)
• Causes: HDD was not successfully converted during encryption key update due to HDD errors or cable noises.
• Remedy: • Check HDD connection. • Format the HDD. • If there is a problem with the HDD, it has to be replaced.

• Code: SC860-00
• Description: HDD startup error at main power on (HDD error) • The HDD is connected but the driver detected the following errors. • SS_NOT_READY:/* (-2)HDD does not become READY*/ • SS_BAD_LABEL:/* (-4)Wrong partition type*/ • SS_READ_ERROR:/* (-5)Error occurred while reading or checking the label*/ • SS_WRITE_ERROR:/* (-6)Error occurred while writing or checking the label*/ • SS_FS_ERROR:/* (-7)Failed to repair the filesystem*/ • SS_MOUNT_ERROR:/* (-8)Failed to mount the filesystem*/ • SS_COMMAND_ERROR:/* (-9)Drive not responding to command*/ • SS_KERNEL_ERROR:/* (-10)Internal kernel error*/ • SS_SIZE_ERROR:/* (-11)Drive size too small*/ • SS_NO_PARTITION:/* (-12)The specified partition does not exist*/ • SS_NO_FILE:/* (-13)Device file does not exist*/ • Attempted to acquire HDD status through the driver but there has been no response for 30 seconds or more.
• Causes: • Unformatted HDD • Label data corrupted • HDD defective
• Remedy: Format the HDD through SP mode.

• Code: SC865-00
• Description: HDD access error During HDD operation, the HDD returned an error.
• Causes: The HDD returned an error that does not constitute SC863 (bad sector) or SC864 (CRC error).
• Remedy: Replace the HDD.

• Code: SC866-00
• Description: SD card authentication error A license error of an application that is started from the SD card was detected.
• Causes: Invalid program data is stored on the SD card.
• Remedy: Store a valid program data on the SD card.

• Code: SC867-00
• Description: SD card removed The SD card that starts an application was removed from the slot.
• Causes: The SD card that starts an application was removed from the slot (mount point of /mnt/sd0).
• Remedy: Turn the main power off/on.

• Code: SC868-00
• Description: SD card access error The SD controller returned an error during operation. (Error occurred at the mount point of /mnt/sd0)
• Causes: • SD card defective • SD controller defective
• Remedy: • Reformat the SD card (using the "SD Formatter" made by Panasonic).* • Check the SD card insertion status. • Replace the SD card. • Replace the controller board.