Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP3054 — Trang 33/40

Code: SC854-00

Description: Bluetooth device disconnected The Bluetooth hardware (USB type) was disconnected after the machine was turned on.
Causes: The Bluetooth hardware (USB type) was disconnected after the machine was turned on.
Remedy: Never remove Bluetooth (USB type) after machine starts

Code: SC855-01

Description: Wireless LAN board error (driver attachment failure) Wireless LAN board error (wireless LAN card: 802.11 is covered)
Causes: • Defective wireless LAN board • Loose connection
Remedy: • Turn the main power off/on. • Replace wireless LAN board

Code: SC855-02

Description: Wireless LAN board error (driver initialization failure) Wireless LAN board error (wireless LAN card: 802.11 is covered)
Causes: • Defective wireless LAN board • Loose connection
Remedy: • Turn the main power off/on. • Replace wireless LAN board

Code: SC857-00

Description: USB I/F Error The USB interface is unusable because of a driver error.
Causes: USB driver error (There are three causes of USB error: RX error/CRC error/STALL. SC is issued only in the case of STALL.)
Remedy: • Check USB connection. • Replace the controller board.

Code: SC858-00

Description: Data encryption conversion error (Key Setting Error) A serious error occurred during an attempt to update the encryption key.
Causes: • USB Flash, other data, corrupted • Communication error caused by electrostatic noise • Controller board defective
Remedy: Replace the controller board.

Code: SC858-01

Description: Data encryption conversion error (HDD Key Setting Error) A serious error occurred during an attempt to update the encryption key.
Causes: • USB Flash, other data, corrupted • Communication error caused by electrostatic noise • Controller board defective
Remedy: Replace the controller board.

Code: SC858-02

Description: Data encryption conversion error (NVRAM Read/Write Error) A serious error occurred after data conversion during an attempt to update the encryption key.
Causes: NVRAM defective
Remedy: Replace the controller board.

Code: SC858-30

Description: Data encryption conversion error (NVRAM Before Replace Error) A serious error occurred after data conversion during an attempt to update the encryption key.
Causes: Software error such as conversion parameters being invalid.
Remedy: Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie