Code :

Code: SC878-00
Description: TPM authentication error TPM electronic recognition failure
Causes: • Update of system module attempted without correct update path • USB flash memory not operating correctly
Remedy: Replace the controller board.

Code: SC878-01
Description: USB flash error There is a problem in the file system of the USB flash memory.
Causes: USB Flash system files corrupted
Remedy: Replace the controller board.

Code: SC880-00
Description: MLB error Reply to MLB access was not returned within a specified time.
Causes: MLB defective
Remedy: • Replace the MLB. • Remove the MLB.

Code: SC881-01
Description: Management area error • A problem was detected in the software • This error may even occur is an IC card option is not installed.
Causes: • This is caused by accumulation of abnormal authentication information in the software. (User operation will not directly cause it.) • At login Example: When a job is sent to the printer/when logged on from the operation panel/when logged on from a Web browser
Remedy: Turn the main power off/on.

Code: SC899-00
Description: Software performance error (signal reception end) Unknown software error occurred.
Causes: Occurs when an internal program behaves abnormally.
Remedy: In case of a hardware defect • Replace the hardware. In case of a software error • Turn the main power off/on. • Try updating the firmware.

Code: SC900-00
Description: Electrical total counter error The total counter contains data that is not a number.
Causes: • NVRAM incorrect type • NVRAM defective or corrupted • Unexpected error from external source • When PRT received signals at SRM, the requested count did not complete.
Remedy: Replace the NVRAM.

‹ First < 35 36 37 38 39 40 >