• Code: 920
• Description: Printer Error 1
  An internal application error was detected and operation cannot continue.
• Causes: • Software defective, switch off/on, or change the controller firmware if the problem is not solved. • Insufficient memory
• Remedy:

• Code: 921
• Description: Printer Error 2
  When the printer application started, the font to use could not be found on the SD card.
• Causes: • The font is not on the SD card
• Remedy:

• Code: 925
• Description: Net File Function Error
• Causes:
• Remedy:

• Code: 953
• Description: Scanner image setting error
  The settings required for image processing using the scanner are not sent from the IPU.
• Causes: • Software defective
• Remedy:

• Code: 954
• Description: Printer image setting error
  The settings required for image processing using the printer controller are not sent from the IPU.
• Causes: • Software defective
• Remedy:

• Code: 955
• Description: Memory setting error
  The settings that are required for image processing using the memory are not sent from the IPU.
• Causes: • Software defective
• Remedy:

• Code: 964
• Description: Printer ready error
  The print ready signal is not generated for more than 17 seconds after the IPU received the print start signal.
• Causes: • Software defective
• Remedy:

• Code: 984
• Description: Print image data transfer error
  After a data transfer begins from the controller to the engine via the PCI bus, the transfer does not end within 15 s.
• Causes: • Controller (SIMAC) board defective • BICU defective • BICU/controller disconnected
• Remedy: