Code :

Code: 725-12
Description: Reg. Roller Transport Motor Error Multi Folder (D615) The motor drive PCB detected an error at the motor.
Causes: • Motor harness or connector loose, broken, defective • Motor or motor drive board defective

Code: 725-13
Description: Dynamic Roller Transport Motor Error Multi Folder (D615) The motor drive PCB detected an error at the motor.
Causes: • Motor harness or connector loose, broken, defective • Motor or motor drive board defective

Code: 725-14
Description: Z-fold top tray exit motor error The motor driver detects an error.
Causes: • Motor over current • Motor driver overheat

Code: 725-30
Description: Z-fold stopper 1 Motor error The bottom fence HP sensor detected that: The bottom fence did not arrive at the home position at the specified time. -or- The bottom fence failed to leave the home position at the specified time.
Causes: • Motor over-current • Motor driver overheat • Motor harness loose

Code: 725-31
Description: 2nd Stopper Motor Error Multi Folder (D615) The 2nd stopper HP sensor did not detect the 2nd stopper in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
Causes: • 2nd stopper HP sensor dirty • Sensor harness or connector loose, broken, defective • 2nd stopper motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective

Code: 725-32
Description: 3rd Stopper Motor Error Multi Folder (D615) The 3rd stopper HP sensor did not detect the 3rd stopper in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
Causes: • 3rd stopper HP sensor dirty • Sensor harness or connector loose, broken, defective • 3rd stopper motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective

Code: 725-33
Description: Jogger Fence Motor Multi Folder (D615) The jogger fence HP sensor did not detect the jogger fence in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
Causes: • Jogger fence HP sensor dirty • Sensor harness or connector loose, broken, defective • Jogger fence motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective

Code: 725-34
Description: Dynamic Roller Lift Motor Error Multi Folder (D615) The dynamic roller HP sensor did not detect the dynamic roller in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
Causes: • Dynamic roller HP sensor dirty • Sensor harness or connector loose, broken, defective • Dynamic roller lift motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective