Danh mục sản phẩm

Code :

Code: 161-02
Description: IPU error (Ri response abnormal) The machine detects an error during an access to the Ri.
Causes: • Defective BICU board

Code: 161-03
Description: IPU error (Aruru operation abnormal) The IPU fails to configure or initialize the DRAM.
Causes: • Defective BICU board

Code: 165
Description: Copy data security unit error The copy data security option is installed by not operating correctly.
Causes: • Copy data security card corrupted • The board is not installed or the board is defective

Code: 181
Description: Inverter Fan Error When the exposure lamp is triggered on, the inverter fan motor does not rotate.
Causes: • SIOB defective • BCU defective • Inverter fan motor defective • Harness between the inverter fan motor - SIOB is disconnected • Harness between the SIOB – BCU is disconnected • Harness between the SIOB – PSU is disconnected

Code: 182
Description: Scanner Fan Error: Right Side The fan located on the right side of the exposure unit is not rotating.
Causes: • Check the fan connections • Fan defective • Check SBU connection • SBU defective

Code: 185
Description: CIS transmission error Error caused during ASIC register's automatic initialization on the CIS, or during transmission between the CIS – DF.
Causes: • Harness between the CIS – DF is disconnected • CIS defective

Code: 186
Description: CIS LED error LED on the CIS causes error • During initializing, the ration of the average between leading-edge area and rearedge is beyond the permissible level (0.7 – 1.43). • During scanning, the shading data peak is under 32(8bit).
Causes: • Harness CN210 and CN220 on ADF are disconnected. • Otherwise, replace CIS.

Code: 187
Description: CIS BK level error The BK level scanned by CIS is abnormal. The BK level average of R, G or B is/are not from 2 to 62. 0 < Calibrated BK data level < 255(10bit).
Causes: • Turn off the machine. • Make sure CN210 and CN220 are connected firmly. • Turn on the machine.

< 1 2 3 4 5 > Last ›

0