• Code: 901
• Description: Mechanical total counter error The mechanical counter is not connected.
• Causes: • Mechanical total counter defective • Mechanical total counter connector not connected

• Code: 910
• Description: External Controller Error 1
• Causes:

• Code: 911
• Description: External Controller Error 2
• Causes:

• Code: 912
• Description: External Controller Error 3
• Causes:

• Code: 913
• Description: External Controller Error 4
• Causes:

• Code: 914
• Description: External Controller Error 5
• Causes:

• Code: 915
• Description: External Controller Error 6 Egret board error
• Causes: The external controller alerted the machine about an error.

• Code: 919
• Description: External Controller Error 6 While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, of BREAK signal from the other station was detected.
• Causes: • Power outage at the EFI controller. • EFI controller was rebooted. • Connection to EFI controller loose.