Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP9000 — Trang 19/25

Code: SC776

Description: Jogger Bottom Fence Motor: 3K Finisher B830
The bottom fence HP sensor detected that: The bottom fence did not arrive at the home position at the specified time. -or- The bottom fence failed to leave the home position at the specified time.
Causes: • If the jogger bottom fence motor is operating: 1 Bottom fence HP sensor harness loose, broken, defective 2 Bottom fence HP sensor defective
• If the jogger bottom fence motor is not operating: 1 Motor blocked by an obstruction 2 Motor harness loose, broken, defective 3 Motor defective 4 Finisher main board defective

Code: SC780

Description: Z-Fold Feed Motor Error
The feed motor that drives the feed rollers and exit rollers in the Z-fold unit is not operating. The 1st alert signals a jam, the 2nd alert triggers this SC.
Causes: • Motor harness loose, broken, defective
• Motor blocked by an obstruction
• Motor defective

Code: SC781

Description: Z-Fold Lower Stopper Motor Error
The lower stopper failed to leave the home position with the specified number of motor pulses.
Note: The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Lower stopper motor disconnected, defective
• Lower stopper motor overloaded due to obstruction
• Lower stopper HP sensor disconnected, defective

Code: SC782

Description: Z-fold Upper Stopper Motor
The upper stopper failed to leave the home position with the specified number of motor pulses.
Note: The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Upper stopper motor disconnected, defective
• Upper stopper motor overloaded due to obstruction
• Upper stopper HP sensor disconnected, defective

Code: SC784

Description: Z-Fold Timing Sensor Adjustment Error 1
The output voltage light emitted from the sensor changed, but the return input was not sufficient to attain V0
Causes: • Sensor, mirror dirty from paper dust, other particles
• Harness loose, broken, defective
• Mirror out of position

Code: SC785

Description: Z-Fold Timing Sensor Adjustment Error 2
The output voltage light emitted from the sensor changed, but the return input was not sufficient to attain V0.
Causes: • Sensor, mirror dirty from paper dust, other particles
• Harness loose, broken, defective
• Mirror out of position

Code: SC786

Description: Z-Fold Memory Error
Several attempts to write to the Z-fold memory failed.
Causes: • Cycle the machine off/on
• EEPROM defective

Code: SC790

Description: Booklet Stapler Jogger Motor Error
The jogger fence HP sensor failed to detect the jogger fence at the home position within the specified time.
Causes: • If the booklet stapler jogger motor is operating: 1 Jogger fence HP sensor harness loose, broken, defective 2 Jogger fence HP sensor defective
• If the jogger bottom fence motor is not operating: 1 Motor blocked by an obstruction 2 Motor harness loose, broken, defective 3 Motor defective 4 Finisher main board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie