• Code: SC867
• Description: SD Card Error 2: SD Card Removal
  The SD card inserted in the system slot when the machine was powered on was removed while the machine was still switched on.
• Causes: • SD card removed from boot slot on the controller
  • Cycle the machine off/on

• Code: SC868
• Description: SD Card Error 3: SD Card Access
  An error is returned during an operation using an SD card. Debug console acquires more detailed information about the error.
• Causes: • SD card not inserted completely
  • SD card defective
  • Controller board defective
  Note: If this SC code is displayed again after cycling the machine off and on, use another SD card. If this does not solve the problem, replace the controller board.

• Code: SC870
• Description: Address Book Data Error
  Address book data stored on the hard disk was detected as abnormal when it was accessed from either the operation panel or the network. The address book data cannot be read from the HDD or SD card where it is stored, or the data read from the media is defective
• Causes: • Software defective; switch off/on, and change the controller firmware if the problem is not solved
  • HDD defective

• Code: SC880
• Description: Media Link Board Error
  A request for access to the Media Link Board was not answered within the specified time.
• Causes: • Media Link Board defective

• Code: SC900
• Description: Electrical Total Counter Error
  The total counter contains data that is not a number
• Causes: • NVRAM disturbed unexpectedly
  • NVRAM defective
  • NVRAM data corrupted

• Code: SC901
• Description: Mechanical Total Counter Error
  The mechanical total counter is disconnected.
• Causes: • User removed the counter while it was operating
  • Poor connection
  • Mechanical total counter defective

• Code: SC910
• Description: External Controller Error 1
• Causes:

• Code: SC911
• Description: External Controller Error 2
• Causes: