Description: Communication error of the remote service modem (Cumin-M)
Causes: -001 - Authentication error The authentication for the RCG-M fails at a dial up connection. • Incorrect SP settings • Disconnected telephone line • Disconnected modem board Disconnected Local Area Network card Check and set the correct user name (SP5816-156) and password (SP5816-157). -004 - Incorrect modem setting Dial up fails due to the incorrect modem setting. Same as -001 Check and set the correct AT command (SP5819-160). -005 - Communication line error The supplied voltage is not sufficient due to the defective communication line or defective connection. Same as -001 Consult with the user's local telephone company.
Description: Incorrect dial up connection -001: Program parameter error -002: Program execution error An unexpected error occurs when the modem (RCG-M) tries to call the center with a dial up connection.
Causes: • Caused by a software bug
Remedy: No action required because this SC does not interfere with operation of the machine.
Description: Controller-to-operation panel communication error at startup After powering on the machine, the communication circuit between the controller and the operation panel is not opened, or communication with controller is interrupted after a normal startup.
Description: RFID: Communication error • Communication error occurs when the RFID starts to communicate with the RFID receptor. • Retry of RFID communication fails three times after the machine has detected the RFID communication error.
Causes: 001-005 Communication error occurs when the RFID starts to communicate with the RFID receptor. • Noise • No memory chip on the toner cartridge • Defective RFID reader and writer • Disconnected RFID controller board I/F 1. Turn the main power off and on. 2. Replace the toner cartridge. 3. Replace the RFID controller board. 061-164 Retry of RFID communication fails three times after the machine has detected the RFID communication error. • Defective RFID reader and writer • No memory chip on the toner cartridge • Noise 1. Replace the toner cartridge. 2. Turn the main power off and on. 3. Replace the RFID-R/W controller board.
Remedy:
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.