Code :

Code: 859
Description: HDD Encryption unit error 2
A serious error occurs when the HDD data is encrypted to update an encryption key with the HDD encryption unit.
Causes: [8] HDD check error: The HDD is not correctly installed. • No HDD installed • Unformatted HDD • The encryption key on the controller is different from the one on the HDD 1. Install the HDD correctly. 1. Initialize the HDD. [9] Power failure during the data encryption: The data encryption (NVRAM and HDD) has not been completed. • Power failure during the data encryption 1. Initialize the HDD. [10] Data read/write error: The DMAC error is detected twice or more. • Same as SC863
Remedy:

Code: 860
Description: HDD: Initialization error
The controller detects that the hard disk fails.
Causes: • HDD not initialized • Defective HDD
Remedy: 1. Reformat the HDD. 2. Replace the HDD.

Code: 861
Description: HDD: Reboot error
The HDD does not become ready within 30 seconds after the power is supplied to the HDD.
Causes: • Loose connection • Defective cables • Defective HDD • Defective controller
Remedy: 1. Check the connection between the HDD and controller. 2. Check and replace the cables. 3. Replace the HDD. 4. Replace the controller.

Code: 862
Description: Bad sector number error The number of bad sectors in the HDD (image data area) goes over 101.
Causes: • Defective HDD
Remedy: 1. Format the HDD with SP5-832-002. 2. Replace the HDD.

Code: 863
Description: HDD: Read error
The data stored in the HDD cannot be read correctly.
Causes: • Defective HDD • Defective controller
Remedy: 1. Replace the HDD. 2. Replace the controller.

Code: 864
Description: HDD: CRC error
While reading data from the HDD or storing data in the HDD, data transmission fails.
Causes: • Defective HDD
Remedy: Replace the HDD.

Code: 866
Description: SD card authentication error
A correct license is not found in the SD card.
Causes: • SD-card data is corrupted.
Remedy: Store correct data in the SD card.

‹ First < 17 18 19 20 21 22 23 >