Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC305SPF — Trang 9/21

Code: 503

Description: 3rd paper tray lift motor malfunction (optional paper feed unit)
The paper lift sensor does not detect paper or finish the detection within the specified time, after the tray lift motor switched on.
Causes: An obstruction (jammed paper, paper scraps, etc.) has blocked the motor drive and caused an overload. Paper lift sensor connection loose, disconnected, or damaged Paper lift sensor defective Tray lift motor connection loose, disconnected, or damaged Tray lift motor defective
Remedy: 1. Check or replace the connector and harness. 2. Replace the tray lift motor.

Code: 508

Description: By-pass bottom plate error
The signal from the by-pass tray HP sensor does not change for 2 seconds after the by-pass bottom plate clutch was activated. If this condition occurs three consecutive times, this SC is generated.
Causes: Disconnected or defective connectors of the by-pass bottom plate clutch. Disconnected or defective by-pass HP sensor. Defective by-pass bottom plate detection filler
Remedy: 1. Check or replace the connectors of the by-pass bottom plate clutch. 2. Check or replace the by-pass HP sensor.

Code: 524

Description: Transport motor error
The machine detects a High signal from a transport motor lock detection for 2 seconds after the transport motor turned on.
Causes: Unit overload. Defective motor.
Remedy: 1. Replace the unit. 2. Replace the motor.

Code: 525

Description: Transport motor error: bank 1
The machine detects a Lock signal from a bank 1 transport motor after the motor turned on.
Causes: Motor overload. Defective motor. Disconnected connectors. Broken harness.
Remedy: 1. Turn off and on the main power switch. 2. Check or connect the connectors. 3. Replace the harness. 4. Replace the motor.

Code: 526

Description: Transport motor error: bank 2
The machine detects a Lock signal from a bank 2 transport motor after the motor turned on.
Causes: Motor overload. Defective motor. Disconnected connectors. Broken harness.
Remedy: 1. Turn off and on the main power switch. 2. Check or connect the connectors. 3. Replace the harness. 4. Replace the motor.

Code: 530

Description: Fusing heater exhaust fan motor error
The motor lock signal error is detected 50 consecutive times (5 seconds) after the motor lock signal was first detected.
Causes: Defective fan motor. Disconnected or defective harness. Defective BICU
Remedy: 1. Check or replace the harness. 2. Replace the fan motor. 3. Replace the BICU.

Code: 531

Description: Development cooling fan motor error
The motor lock signal error is detected 50 consecutive times (5 seconds) after the motor lock signal was first detected.
Causes: Defective fan motor. Disconnected or defective harness. Defective BICU
Remedy: 1. Check or replace the harness. 2. Replace the fan motor. 3. Replace the BICU.

Code: 532

Description: Writing cooling fan motor error
The motor lock signal error is detected 50 consecutive times (5 seconds) after the motor lock signal was first detected.
Causes: Defective fan motor. Disconnected or defective harness. Defective BICU
Remedy: 1. Check or replace the harness. 2. Replace the fan motor. 3. Replace the BICU.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie