• Code: 865-00
• Description: HD access error During HDD operation, the HDD returned an error.
• Causes: The HDD returned an error that does not constitute SC863 (bad sector) or SC864 (CRC error).
• Remedy: Replace the HDD.

• Code: 865-01
• Description: HDD access error During HDD operation, the HDD returned an error.
• Causes: The HDD returned an error that does not constitute SC863 (bad sector) or SC864 (CRC error). (An error occurred in an area that does not belong to a partition, such as the disk label area.)
• Remedy: Replace the HDD.

• Code: 865-02 ... 865-23
• Description: HDD access error During HDD operation, the HDD returned an error.
• Causes: The HDD returned an error that does not constitute SC863 (bad sector) or SC864 (CRC error). (An error occurred in partition "a" (SC865-02) to partition “v” (SC865-23)).
• Remedy: Replace the HDD.

• Code: 865-50 ... 865-73
• Description: HDD time-out error The machine does not detect a reply from the HDD during the HDD operation.
• Causes: The HDD does not respond to the read/ write command from the machine.
• Remedy: • Check the harness connections between the controller board and HDD. • Replace the HDD.

• Code: 866-00
• Description: SD card authentication error A license error of an application that is started from the SD card was detected.
• Causes: Invalid program data is stored on the SD card.
• Remedy: Store a valid program data on the SD card.

• Code: 867-00
• Description: SD card removed The SD card was removed while the machine is on.
• Causes: An application SD card has been removed from the slot (mount point of /mnt/ sd0).
• Remedy: Cycle the main power off and on.

• Code: 867-01
• Description: SD card removed The SD card was removed while the machine is on.
• Causes: An application SD card has been removed from the slot (mount point of /mnt/ sd1).
• Remedy: Cycle the main power off and on.

• Code: 867-02
• Description: SD card removed The SD card was removed while the machine is on.
• Causes: An application SD card has been removed from the slot (mount point of /mnt/ sd2).
• Remedy: Cycle the main power off and on.