Code :

Code: 878-01
Description: USB flash error There is a problem in the file system of the USB flash memory.
Causes: USB Flash system files corrupted
Remedy: Replace the controller board.

Code: 880-00
Description: MLB error Reply to MLB access was not returned within a specified time.
Causes: MLB defective
Remedy: • Replace the MLB. • Remove the MLB.

Code: 881-01
Description: Management area error • A problem was detected in the software • This error may even occur is an IC card option is not installed.
Causes: • This is caused by accumulation of abnormal authentication information in the software. (User operation will not directly cause it.) • At login Example: When a job is sent to the printer/when logged on from the operation panel/when logged on from a Web browser
Remedy: Cycle the main power off and on.

Code: 899-00
Description: Software performance error (signal reception end) Unknown software error occurred.
Causes: Occurs when an internal program behaves abnormally.
Remedy: In the case of a hardware defect • Replace the hardware. In the case of a software error • Cycle the main power off and on. • Try updating the firmware.

Code: 900-00
Description: Printer application error (no response within determined time in Printing). Electrical total counter error The total counter contains data that is not a number.
Causes: • NVRAM incorrect type • NVRAM defective or corrupted • Unexpected error from external source • When PRT received signals at SRM, the requested count did not complete.
Remedy: Replace the NVRAM.

Code: 920-01
Description: Printer application error (Timeout during Printing). When an error is detected in the application, which makes continued operation impossible.
Causes: • Software bug • Unexpected hardware configuration (such as insufficient memory)
Remedy: • Cycle the main power off and on. • Increase the memory storage capacity.

‹ First < 25 26 27 28 29 >