Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC3501 — Trang 10/25

Code: 504-01

Description: Tray 4 error (Paper Feed Unit or LCT) For the two-tray paper feed unit When the tray lift motor is turned on, the upper limit is not detected within 10 seconds. If this condition occurs three consecutive times, the SC is generated. For the LCT If the upper or lower limit is not detected within 8 seconds when the tray lift motor is turned on to lift up or lower the tray
Causes: • Defective tray lift motor or connector disconnection • Defective lift sensor or connector disconnection
Remedy: 1. Check the cable connections. 2. Check and/or replace the defective component.

Code: 504-02

Description: Tray 4 error (3 Tray Paper Feed Unit)
This SC is generated if the following condition occurs 3 consecutive times. For the two-tray paper feed unit • When the tray lowers, the tray lift sensor does not go off within 1.5 sec. For the LCT • If the upper limit does not go off for 1.5 seconds even the tray lift motor turns on to lower the tray after the upper limit has been detected at power on.
Causes: • Defective tray lift motor or connector disconnection • Defective lift sensor or connector disconnection
Remedy: 1. Check the cable connections. 2. Check and/or replace the defective component.

Code: 505-1

Description: 5th tray lift malfunction (optional LCT)
This SC is generated if the following condition occurs: • When the tray lift sensor of the LCT 1200-sheet does not go on after the tray lift motor has turned on to lift the paper tray. • When the tray lift sensor of the LCT 1200-sheet does not go off after the tray lift motor has turned on to lower the paper tray. • When the tray lift sensor of the LCT 1200-sheet does not go on after the pickup roller solenoid has turned on at power on.
Causes: • Tray lift motor defective or disconnected • Tray lift sensor defective or disconnected
Remedy: 1. Check the harness connections. 2. Replace the tray lift motor. 3. Replace the tray lift sensor.

Code: 505-2

Description: 5th tray lift malfunction (optional LCT)
Both tray lift sensor and lower limit sensor are turned on at the same time when the main power is turned on or the right door is closed.
Causes: • Tray lift motor defective or disconnected • Tray lift sensor defective or disconnected • Lowe limit sensor defective or disconnected
Remedy: 1. Check the harness connections. 2. Replace the tray lift motor. 3. Replace the tray lift sensor. 4. Replace the lower limit sensor.

Code: 530

Description: Fusing fan error
The IOB does not receive the lock signal 10 seconds after turning on the fusing fan.
Causes: • Defective fusing fan motor or connector disconnection • Defective IOB
Remedy: Check the connector and/or replace the fusing fan motor.

Code: 531

Description: Ventilation fan (at the left side of the machine) motor-front/rear error
The IOB does not receive the lock signal for 2 seconds after turning on the ventilation fan motor-front/rear.
Causes: • Defective ventilation fan motor-front or rear
Remedy: 1. Replace the ventilation fan (at the left side of the machine) motor-front or rear. 2. Replace the IOB.

Code: 532

Description: IH coil fan error
The machine does not detect the fan motor lock signal for 2 seconds while the IH coil fan turns on.
Causes: • Disconnected harness • Overload on the IH coil fan motor • Defective IH coil fan motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the IH coil fan. 3. Replace the IOB.

Code: 533

Description: IH inverter fan error
The machine does not detect the fan motor lock signal for 2 seconds while the IH inverter fan turns on.
Causes: • Disconnected harness • Overload on the IH inverter fan motor • Defective IH inverter fan motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the IH inverter fan. 3. Replace the IOB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie