Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC401SP — Trang 17/25

Code: 841-00

Description: EEPROM error 2: EEPROM read/write error
Causes: Mirrored data of the EEPROM is different from the original data in EEPROM.
Remedy: • Data in EEPROM was overwritten for some reason.

Code: 842-00

Description: NAND-Flash Update Verify Error Detected. CTL SCS write error (verify error) occurred at the Nand-Flash module when remote ROM or main ROM was updated.
Causes: Nand-Flash failed
Remedy: • Cycle the machine off/on. • Replace controller board

Code: 842-01

Description: Insufficient Nand-Flash blocks (threshold exceeded) CTL At startup, or when machine returned from low power mode, the Nand- Flash status was read and judged that the number of unusable blocks had exceeded threshold, and then SCS generated the SC code.
Causes: Number of unusable blocks exceeded threshold for Nand-Flash
Remedy: • Replace controller board

Code: 842-02

Description: Number of Nand-Flash block deletions exceeded CTL At startup, or when the machined returned from low power mode, the Nand-Flash was read and judged that the number of deleted blocks had exceeded threshold, and then SCS generated this SC code.
Causes: Number of blocks deleted exceeded threshold for Nand-Flash
Remedy: • Replace controller board

Code: 853-00

Description: Bluetooth device connection error CTL The Bluetooth device (USB type) was connected after the machine was powered on.
Causes: Always connect the Bluetooth device (USB type) before the machine is powered on.
Remedy: • Turn the machine off. • Insert the Bluetooth device into either USB Host interface socket on the controller board faceplate. • Turn the machine on.

Code: 854-00

Description: Bluetooth device removed CTL This error occurred when the Bluetooth device (USB type) was removed.
Causes: • Loose connection • Defective wireless Bluetooth device
Remedy: • Make sure that the Bluetooth device has not been removed • Make sure that it is inserted securely in the USB Host Interface socket on the controller board faceplate.

Code: 855-01

Description: Wireless LAN card error 1 CTL A problem occurred when the installed Wireless LAN device was installed because is not supported by this machine, or the Wireless LAN device is defective.
Causes: Wireless LAN device is not connected correctly, or the device is defective.
Remedy: • Make sure that the wireless LAN is supported by this machine (IEEE 802.11 Interface Unit Type O M417). • Make sure that the device is installed correctly.

Code: 855-02

Description: Wireless LAN card error 2 CTL A problem occurred when the Wireless LAN device was not initialized at power on.
Causes: The device is not installed correctly.
Remedy: • Switch the machine off. • Make sure that the device is installed correctly.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie