Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC401SP — Trang 3/25

Code: 230-03

Description: FGATE ON error: M
Causes: The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [M].
Remedy: • Check the connection between the controller board and the IPU. • Replace the IPU.

Code: 230-04

Description: FGATE ON error: Y
Causes: The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [Y].
Remedy: • Check the connection between the controller board and the IPU. • Replace the IPU.

Code: 231-01

Description: FGATE OFF error: K
Causes: • The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for end position [K]. • The PFGATE ON signal still asserts when the next job starts.
Remedy: • Check the connection between the controller board and the IPU. • Replace the IPU.

Code: 231-02

Description: FGATE OFF error: C
Causes: • The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for end position [C]. • The PFGATE ON signal still asserts when the next job starts.
Remedy: • Check the connection between the controller board and the IPU. • Replace the IPU.

Code: 231-03

Description: FGATE OFF error: M
Causes: • The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for end position [M]. • The PFGATE ON signal still asserts when the next job starts.
Remedy: • Check the connection between the controller board and the IPU. • Replace the IPU.

Code: 231-04

Description: FGATE OFF error: Y
Causes: • The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for end position [Y]. • The PFGATE ON signal still asserts when the next job starts.
Remedy: • Check the connection between the controller board and the IPU. • Replace the IPU.

Code: 240-01

Description: LD error: K or C. The IPU detects LDB error a few times consecutively when laser unit turns on after LDB initialization.
Causes: • Worn-out LD • Disconnected or broken harness of the LDB • Defective LDB • Defective IPU
Remedy: • Replace the harness of the laser unit. • Replace the laser unit. • Replace the IPU.

Code: 240-04

Description: LD error: Y or M. The IPU detects LDB error a few times consecutively when laser unit turns on after LDB initialization.
Causes: • Worn-out LD • Disconnected or broken harness of the LDB • Defective LDB • Defective IPU
Remedy: • Replace the harness of the laser unit. • Replace the laser unit. • Replace the IPU.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie