Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC5000 — Trang 20/25

Code: 765

Description: Paper position sensor slide motor error
The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the paper position sensor slide motor. 2. Defective paper position sensor slide motor.

Code: 766

Description: Paper position sensor slide motor error
The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the paper position sensor slide motor. 2. Defective paper position sensor slide motor.

Code: 767

Description: Paper position sensor slide motor error
The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the paper position sensor slide motor. 2. Defective paper position sensor slide motor.

Code: 770

Description: Shift motor error
The shift motor HP sensor does not detect any change for 1.86 seconds after the shift motor has turned on at power on or during its operation.
Causes: • Defective shift motor • Defective shift motor HP sensor
Remedy: 1. Check the connections to the shift motor and the shift motor HP sensor. 2. Defective shift motor or the shift motor HP sensor.

Code: 791

Description: Bridge unit error
The machine recognizes the finisher, but does not recognize the bridge unit.
Causes: • Defective connector • Broken harness
Remedy: 1. Check the connections between the bridge unit and the machine. 2. Install a new bridge unit.

Code: 792

Description: Finisher error
The machine does not recognize the finisher, but recognizes the bridge unit.
Causes: • Defective connector • Defective harness • Incorrect installation
Remedy: 1. Check the connections between the finisher and the machine. 2. Install a new finisher.

Code: 816

Description: Energy saving I/O sub-system error
The energy saving I/O sub-system detects an error.
Causes: • Controller board defective
Remedy: 1. Replace the controller board.

Code: 819

Description: Fatal kernel error
Due to a control error, a RAM overflow occurred during system processing. One of the following messages was displayed on the operation panel.
Causes: • System program defective • Controller board defective • Optional board defective
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie