Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC5000 — Trang 21/25

Code: 820

Description: Self-diagnostics error: CPU [XXXX]: Detailed error code. [0612] Cut-in in ASIC occurs.
Causes: • Defective ASIC • Defective devices in which ASIC detects cut-in.
Remedy: 1. Replace the controller board.

Code: 833

Description: Self-diagnostic error 8: Engine I/F ASIC
Causes: [0F30] [0F31] • ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. 1. Replace the VBCU [0F41] • ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. 1. Replace the VBCU [50B1] Could not initialize or read the bus connection. • Check for loose connections at the mother board. 1. Replace the mother board [50B2] Value of the SSCG register is incorrect. • Check for loose connections at the mother board. 1. Replace the mother board
Remedy:

Code: 851

Description: IEEE1394 interface error
The 1394 interface is unusable.
Causes: • Defective IEEE1394 • Defective controller.
Remedy: 1. Turn the main switch off and on. 2. Replace the IEEE1394 interface board. 3. Replace the controller.

Code: 853

Description: Wireless LAN card not detected
The wireless LAN card is not detected before communication is established, though the wireless LAN board is detected.
Causes: • Loose connection
Remedy: 1. Check the connection.

Code: 854

Description: Wireless LAN/Bluetooth card not detected
The wireless LAN/Bluetooth card is not detected after communication is established, but the wireless LAN board is detected.
Causes: • Loose connection
Remedy: 1. Check the connection.

Code: 855, 856

Description: Wireless LAN/Bluetooth card error
An error is detected in the wireless LAN/Bluetooth card.
Causes: • Loose connection • Defective wireless LAN/Bluetooth card
Remedy: 1. Check the connection. 2. Replace the wireless LAN/Bluetooth card.

Code: 857

Description: USB interface error The USB interface cannot be used due to a driver error.
Causes: • Defective USB driver • Loose connection
Remedy: 1. Check the connection. 2. Replace the USB board.

Code: 858

Description: HDD Encryption unit error 1
A serious error occurs when data is encrypted to update an encryption key with the HDD encryption unit.
Causes: [0] Encryption key acquisition error: The controller fails to get a new encryption key. • Defective controller board 1. Replace the controller board. [1] Encryption key setting for HDD error: The controller fails to copy a new encryption key to the HDD. • Defective SATA chip on the controller board 1. Replace the controller board. [2] Encryption key setting for HDD error: The controller fails to copy a new encryption key to the HDD. • Defective SATA chip on the controller board 1. Replace the controller board. [30] NVRAM data encryption error 2: An error occurs before the NVRAM data is encrypted. • Defective controller board 1. Replace the controller board. [0] NVRAM data encryption error 2: An error occurs before the NVRAM data is encrypted. [31] Other error: A serious error occurs while the data is encrypted. Same as SC991
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie