Mã lỗi Ricoh Aficio MPC5000 — Trang 24/25
Code:
Tất cả lỗi (198)
101
120
121
141
142
144
161-001
161-002
165
195
202
203
204
210
211
212
213
220
221
222
223
224
225
226
227
230
231
232
233
234
235
236
237
240
241
242
243
285
300
301
302
303
360
361
362
363
364
365
366
367
372
373
374
375
380
381
382
383
396
397
398
399
400
441
442
443
452
460
490
491
492
498
501
502
503-01
503-02
504-01
504-02
505-1
505-2
530
531
532
533
534
535
536
540
541
542
543
544
545
547
548
548
551
552
553
554
557
559
561
562
563
564
565
569
581
582
585
610
611
620
621
622
623
632
633
634
635
636
641
650
651
669
670
671
672
681
682
683
687
690
700
701
721
723
725
730
740
741
742
743
744
746
750
753
760
761
763
764
765
766
767
770
791
792
816
819
820
833
851
853
854
855, 856
857
858
859
860
861
863
864
865
866
867
868
870
872
873
874
875
876
877
878
880
900
910...914
919
920
921
990
991
992
994
995
997
998
Description: TPM system authentication error The system firmware is not authenticated by TPM (security chip).
Causes: • Incorrect updating for the system firmware • Defective flash ROM on the controller board
Remedy: 1. Replace the controller board.
Description: File format converter error The file format converter does not respond.
Causes: • Defective file format converter
Remedy: 1. Replace the file format converter.
Description: Electric counter error Abnormal data in the counters.
Causes: • Defective NVRAM • Defective controller
Remedy: 1. Check the connection between the NVRAM and controller. 2. Replace the NVRAM. 3. Replace the controller.
Description: External Controller Error
Causes: The external controller alerted the machine about an error.
Remedy: • Please refer to the instructions for the external controller (application).
Description: External Controller Error 6 While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, or BREAK signal from the other station was detected.
Causes: • Power outage at the EFI controller • EFI controller was rebooted • Connection to EFI controller loose
Remedy:
Description: Printer application error An error is detected in the printer application program.
Causes: • Defective software • Unexpected hardware resource (e.g., memory shortage)
Remedy: 1. Software defective; switch off/on, or change the controller firmware if the problem is not solved 2. Insufficient memory
Description: Printer font error A necessary font is not found in the SD card.
Causes: • A necessary font is not found in the SD card. • The SD card data is corrupted.
Remedy: 1. Check that the SD card has the correct data.
Description: Software performance error The software makes an unexpected operation.
Causes: • Defective software • Defective controller • Software error
Remedy: 1. Turn the main switch off and on. 2. Reinstall the controller and/or engine main firmware.