• Code: SC867
• Description: SD card error 2: SD card removed
  The SD card in the boot slot when the machine was turned on was removed while the machine was on.
• Causes: Insert the SD card, then turn the machine off and on.

• Code: SC868
• Description: SD card error 3: SD card access
  An error occurred while an SD card was being used.
• Causes: • SD card not inserted correctly • SD card defective • Controller board defective

• Code: SC870
• Description: Address book data error
  Address book data on the hard disk was detected as abnormal when it was accessed from either the operation panel or the network. The address book data cannot be read from the HDD or SD card where it is stored, or the data read from the media is defective.
• Causes: • Software defective. • Cycle the machine off/on. • Replace controller firmware. • HDD defective

• Code: SC874
• Description: Delete All error 1: HDD
  A data error was detected for the HDD/ NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit running from an SD card.
• Causes: • Turn the main switch off/on and try the operation again. • Install the Data Overwrite Security Unit again.. • HDD defective

• Code: SC875
• Description: Delete All error 2: Data area
  An error occurred while the machine deleted data from the HDD.
• Causes: • Cycle the machine off/on. • Try the operation again.

• Code: SC901
• Description: Mechanical Counter 1 error
  Mechanical Counter 1 was not set correctly at power on, or the operator disconnected the counter while machine was operating.
• Causes: • Mechanical Counter 1 connection loose or defective • Mechanical Counter 1 defective

• Code: SC902
• Description: Mechanical Counter 2 error
  Mechanical Counter 2 was not set correctly at power on, or the operator disconnected the counter while machine was operating.
• Causes:

• Code: SC910 … C914
• Description: External controller error
• Causes: