• Code: SC874
• Description: Delete All error 1: HDD
  A data error was detected for the HDD/ NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit running from an SD card.
• Causes: • Turn the main switch off/on and try the operation again. • Install the Data Overwrite Security Unit again.. • HDD defective

• Code: SC875
• Description: Delete All error 2: Data area
  An error occurred while the machine deleted data from the HDD.
• Causes: • Cycle the machine off/on. • Try the operation again.

• Code: SC901
• Description: Mechanical Counter 1 error
  Mechanical Counter 1 was not set correctly at power on, or the operator disconnected the counter while machine was operating.
• Causes: • Mechanical Counter 1 connection loose or defective • Mechanical Counter 1 defective

• Code: SC902
• Description: Mechanical Counter 2 error
  Mechanical Counter 2 was not set correctly at power on, or the operator disconnected the counter while machine was operating.
• Causes:

• Code: SC910 … SC914
• Description: External controller error
• Causes:

• Code: SC919
• Description: External controller down
  The EAC received an interrupt signal from the FLUTE serial driver during print jobs in progress and the connection between the copier and external controller was broken.
• Causes: • Switch the machine off and on.

• Code: SC925
• Description: Net File function error
  The NetFile file management on the HDD cannot be used, or a NetFile management file is corrupted and operation cannot continue. The HDDs are defective and they cannot be debugged or partitioned, so the Scan Router functions (delivery of received faxes, document capture, etc.), Web services, and other network functions cannot be used. HDD status codes are displayed below the SC code:
• Causes: