• Code: SC783-11
• Description: Jogger Fence Motor Multi Folder (D454)
  The jogger fence HP sensor did not detect the jogger fence in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
• Causes: • Jogger fence HP sensor dirty • Sensor harness or connector loose, broken, defective • Jogger fence motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective

• Code: SC783-12
• Description: Positioning Roller Motor Error Multi Folder (D454)
  The positioning roller HP sensor did not detect the positioning roller in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
• Causes: • Positioning roller HP sensor dirty • Sensor harness or connector loose, broken, defective • Positioning roller motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective

• Code: SC783-13
• Description: FM2 Direct-Send JG Motor Multi Folder (D454)
  The direct-send JG HP sensor did not detect the direct-send JG in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
• Causes: • FM2 direct-send JG HP sensor dirty • Sensor harness or connector loose, broken, defective • FM2 direct-send JG motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective

• Code: SC783-14
• Description: FM6 Pawl Motor Multi Folder (D454)
  The FM6 pawl HP sensor did not detect the FM6 pawl in (or out of) its home position. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
• Causes: • FM6 pawl HP sensor dirty • Sensor harness or connector loose, broken, defective • FM6 pawl motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective

• Code: SC783-2
• Description: 3rd Stopper Motor Error Multi Folder (D454)
  The 3rd stopper HP sensor did not detect the 3rd stopper in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
• Causes: • 3rd stopper HP sensor dirty • Sensor harness or connector loose, broken, defective • 3rd stopper motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective

• Code: SC783-3
• Description: 1st Fold Motor Error Multi Folder (D454)
  The motor drive PCB detected an error at the motor.
• Causes: • Motor harness or connector loose, broken, defective • Motor or motor drive board defective

• Code: SC783-4
• Description: 2nd Fold Motor Error Multi Folder (D454)
  The motor drive PCB detected an error at the motor.
• Causes: • Motor harness or connector loose, broken, defective • Motor or motor drive board defective

• Code: SC783-5
• Description: Crease Motor Error Multi Folder (D454)
  The motor drive PCB detected an error at the motor.
• Causes: • Motor harness or connector loose, broken, defective • Motor or motor drive board defective