Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC6502SP — Trang 47/63

Code: SC720-60

Description: Booklet Stapling Motor Error (D703/D704) • When moving to the home position, home position was not detected within specified time (t0 sec). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified time (t1 sec). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-62

Description: Movement Roller Transport Motor Error (D703/D704) Motor driver detected an error (DC motor control error). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Encoder defective
Remedy: • Check the motor connection. • Replace the motor. • Replace the PCB.

Code: SC720-63

Description: Folding Transport Motor Error (D703/D704) Motor driver detected an error (short-circuit or overheat). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload
Remedy: • Check the motor connection. • Replace the motor. • Replace the PCB.

Code: SC720-65

Description: Press Folding Motor Error (D703/D704) • Motor driver detected an error (short-circuit or overheat). (SC from the first time) • When moving to the home position, home position was not detected within specified number of pulses (p0 pulses). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-70

Description: Tray Lift Motor Error (D703/D704) • Motor controller detected an error (overload). (The first time: jam display, the second time: SC) • When descending, paper sensor is still detecting paper after the specified time (t0 sec). (The first time: jam display, the second time: SC) • When ascending, paper sensor did not detect paper within specified time (t1 sec). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-71 ... SC720-74

Description: SC720-71 B Shift Motor Error (D703/D704) SC720-72 B Shift Jogger Front Motor Error (D703/D704) SC720-73 B Shift Jogger Rear Motor Error (D703/D704) SC720-74 B Shift Jogger Retraction Motor Error (D703/D704). • Motor driver detected an error (short-circuit or overheat). (SC from the first time) • When moving to the home position, home position was not detected within specified number of pulses (p0 pulses). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-75

Description: Stacking Roller Motor Error (D703/D704) • Motor driver detected an error (DC motor control error). (The first time: jam display, the second time: SC) • When moving to the home position, home position was not detected within specified time (t0 sec). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified time (t1 sec). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-77

Description: Leading Edge Guide Motor Error (D703/D704). • Motor driver detected an error (short-circuit or overheat). (SC from the first time) • When moving to the home position, home position was not detected within specified number of pulses (p0 pulses). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie