• Code: 868
• Description: SD card error 3: SD card access An error occurred while an SD card was used.
• Causes: • SD card not inserted correctly • SD card defective • Controller board defective • To reformat the SC card, use SD Formatter Ver 1.1.
• Remedy:

• Code: 870
• Description: Address book data error Address book data on the hard disk was detected as abnormal when it was accessed from either the operation panel or the network. The address book data cannot be read from the HDD or SD card where it is stored, or the data read from the media is defective.
• Causes: • Turn the machine power off/on. If this does not solve the problem, do the Procedure below. • HDD defective
• Remedy: 1. Do SP5846-50 (UCS Settings – Initialize all Directory Info.) to reset all address book data. 2. After 3 sec. reset the user information with SP5832-6 (HDD Formatting– User Information). 3. Turn the main power switch off/on.

• Code: 873
• Description: HDD mail send data error
• Causes: An error was detected on the HDD immediately after the machine was turned on, or power was turned off while the machine used the HDD.
• Remedy: • Do SP5832-7 (Format HDD – Mail TX Data) to initialize the HDD • Replace the HDD

• Code: 874
• Description: Delete All error 1: HDD
• Causes: A data error was detected for the HDD/NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit B735 running from the DOS SD card.
• Remedy: • Turn the main switch off/on, do the operation again. • Install the Data Overwrite Security Unit again. • HDD defective

• Code: 875
• Description: Delete All error 2: Data area
• Causes: An error occurred when the machine deleted data from the HDD. Note: The source of this error is the Data Overwrite Security Unit B735 running from the DOS SD card.
• Remedy: • Turn the main switch off/on and try the operation again.

• Code: 880
• Description: File Format Converter (MLB) error A request to access the MLB was not answered within the specified time (60 sec.).
• Causes: • File format converter board defective
• Remedy:

• Code: 900
• Description: Electrical total counter error The total counter contains something that is not a number.
• Causes: • NVRAM incorrect type • NVRAM defective • NVRAM data scrambled • Unexpected error from external source
• Remedy:

• Code: 901
• Description: Mechanical Total Counter. The mechanical counter is not connected.
• Causes: • Mechanical counter connection loose, broken, defective • Replace the mechanical counter
• Remedy: