Code :

Code: SC690
Description: VDB communication error An error occurred on the video drive board.
Causes: • VDB harness loose, broken, defective • IOB harness loose, broken, defective • VDB to IPU harness loose, broken, defective
Remedy:

Code: SC720
Description: Fan folder transport motor error A lock signal was detected at the transport motor for longer than 5 sec.
Causes: • Transport motor harness loose, broken, defective • Transport motor drive mechanism overloaded due to physical obstruction • Transport motor defective • MCU defective
Remedy:

Code: SC722
Description: Horizontal transport guide HP sensor error The home position sensor neither switched on nor switched off while the pressure release drive was operating.
Causes: • Fan fold motor harness loose, broken, defective • Vertical transport clutch defective • HP sensor harness loose, broken, defective • HP sensor defective • MCU defective
Remedy:

Code: SC726
Description: Cross folder jogger HP sensor error The jogger fence HP sensor neither switched on nor switched off during operation of the jogger fence.
Causes: • Jogger fence HP sensor harness loose, broken, defective • Jogger motor harness loose, broken, defective • Motor drive overload due to physical obstacle • Jogger fence HP sensor defective • Jogger motor defective • MCU defective
Remedy:

Code: SC727
Description: Cross folder horizontal transport guide HP sensor error The horizontal transport guide HP sensor did not switch on or switch off during operation of the horizontal transport press motor.
Causes: • Horizontal transport guide HP sensor harness loose, broken, defective • Horizontal transport press motor harness loose, broken, defective • Motor drive overload due to physical obstacle • Horizontal transport guide HP sensor defective • Horizontal transport press motor defective • MCU defective
Remedy:

Code: SC750
Description: Cross fold shift tray upper limit sensor error The sensor did not go on or off while the tray was being raised and lowered.
Causes: • Tray lift motor harness loose, broken, defective • Tray lift motor overloaded due to physical obstacle • Tray upper limit sensor 1 harness loose, broken, defective • Tray lift motor defective • Tray upper limit sensor 1 defective • Main board defective
Remedy:

Code: SC762
Description: Fan folder fan fold plate HP sensor (F) error The state (on/off) of the front fan fold plate HP sensor did not change within 1 sec. after the fan fold plate motor (F) switched on
Causes: • Undetected paper or scraps have jammed the fold mechanism • HP sensor harness loose, broken, defective • Motor harness loose, broken defective • HP sensor defective • Motor defective • MCU defective
Remedy:

Code: SC763
Description: Fan folder fan fold plate HP sensor (R) error The state (on/off) of the rear fan fold plate HP sensor did not change within 1 sec. after the fan fold plate motor (R) switched on
Causes: • Undetected paper or scraps have jammed the fold mechanism • HP sensor harness loose, broken, defective • Motor harness loose, broken defective • HP sensor defective • Motor defective • MCU defective
Remedy: