Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio Pro C720S — Trang 28/85

Code: 495

Description: TD sensor Y error • The TD sensor for a color determines that no developer is in the development unit at TD sensor initialization. • The TD sensor for a color does not detect a normal output from the development unit during printing.
Causes: • No developer in the development unit • Agitation auger defective
Remedy: 1. Check or reinstall developer in the development unit. 2. Replace the development unit.

Code: 496-011 ... 496-013

Description: -011 C MUSIC sensor: Front LED adjustment error -012 C MUSIC sensor: Center LED adjustment error -013 C MUSIC sensor: Rear LED adjustment error The LED adjustment for the front, center or rear MUSIC sensor fails at the Vsg adjustment.
Causes: • ID/MUSIC sensor unit shutter defective • Harness of sensor unit disconnected or broken • Front, center or rear MUSIC sensor defective
Remedy: 1. Check the harness and connection. 2. Replace the ID/MUSIC sensor unit.

Code: 496-014 ... 496-016

Description: -014 C MUSIC sensor: Front patterns error 1 -015 C MUSIC sensor: Center patterns error 1 -016 C MUSIC sensor: Rear patterns error 1 The front, center or rear MUSIC sensor detects the less number of the MUSIC patterns on the ITB.
Causes: • Sensor harness disconnected or broken • LD board(s) defective • Image transferring to the ITB insufficient
Remedy: 1. Check the harness and connection. 2. Replace the laser unit(s). Note: If one of SC250 to SC257 has occurred before, you can tell which is the problem laser unit (YM or CK).

Code: 496-017 ... 496-019

Description: -017 C MUSIC sensor: Front patterns error 2 -018 C MUSIC sensor: Center patterns error 2 -019 C MUSIC sensor: Rear patterns error 2 The front, center or rear MUSIC sensor detects too many MUSIC patterns on the ITB.
Causes: • ITB scratched or broken • Dust on the ITB
Remedy: 1. Clean the ITB. 2. Replace the ITB.

Code: 496-020 ... 496-022

Description: -020 C MUSIC sensor: Y color shift error 1 -021 C MUSIC sensor: M color shift error 1 -022 C MUSIC sensor: C color shift error 1 The yellow, magenta or cyan image shifting in the sub-scan direction exceeds the capable correction range during process control
Causes: • ITB scratched or broken • Dust on the ITB • New laser unit installed • Process control execution incorrect
Remedy: 1. Execute the manual process control with SP3820-001. 2. Clean or replace the ITB. 3. Replace the laser unit YM or CK.

Code: 496-023 ... 496-025

Description: -023 C MUSIC sensor: Y color shift error 2 -024 C MUSIC sensor: M color shift error 2 -025 C MUSIC sensor: C color shift error 2 The yellow, magenta or cyan image shifting in the main-scan direction exceeds the capable correction range in the process control
Causes: • ITB scratched or broken • Dust on the ITB • New laser unit installed • Process control incorrect
Remedy: 1. Execute the manual process control with SP3820-001. 2. Clean or replace the ITB. 3. Replace the laser unit YM or CK.

Code: 496-026 ... 496-028

Description: -026 C MUSIC sensor: Y magnification correction error 1 -027 C MUSIC sensor: M magnification correction error 1 -028 C MUSIC sensor: C magnification correction error 1 The magnification correction in the main-scan for yellow, magenta or cyan image exceeds the capable range in the process control.
Causes: • ITB scratched or broken • Dust on the ITB • New laser unit installed • Process control execution incorrect
Remedy: 1. Execute the manual process control with SP3820-001. 2. Clean or replace the ITB. 3. Replace the laser unit YM or CK.

Code: 496-029 ... 496-031

Description: -029 C MUSIC sensor: Y magnification correction error 2 -030 C MUSIC sensor: M magnification correction error 2 -031 C MUSIC sensor: C magnification correction error 2 The left and right magnification correction in the main-scan for yellow, magenta or cyan image exceed the capable range in the process control.
Causes: • ITB scratched or broken • Dust on the ITB • New Laser unit installed • Process control execution incorrect
Remedy: 1. Execute the manual process control with SP3820-001. 2. Clean or replace the ITB. 3. Replace the laser unit YM or CK.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie