Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio Pro C720S — Trang 30/85

Code: 508

Description: Tray 5 (2nd A3 LCT) feed error. One of the following conditions is detected in tray 5 or 6 of the 2nd A3 LCT: • The tray 5 or 6 lift sensor is not activated for 10 s after the tray 5 or 6 lift motor turned on. • Upper limit is not detected within 10 s while the paper tray is lifting during paper feed. • The tray 5 or 6 lift sensor is already activated when tray 5 or 6 is placed in the machine
Causes: • Poor connection or defective tray 5 or 6 lift motor • Poor connection or defective tray 5 or 6 lift sensor • Remaining paper or another obstruction has stopped the tray and motor. • Pick-up solenoid 5 or 6 connector is loose. • Pick-up solenoid 5 or 6 is blocked by an obstruction.
Remedy: 1. Replace the tray 5 or 6 lift motor. 2. Replace the tray 5 or 6 lift sensor. 3. Check or clear obstacles around pick-up solenoid 5 or 6.

Code: 509

Description: Tray 6 (2nd A3 LCT) feed error. One of the following conditions is detected in tray 5 or 6 of the 2nd A3 LCT: • The tray 5 or 6 lift sensor is not activated for 10 s after the tray 5 or 6 lift motor turned on. • Upper limit is not detected within 10 s while the paper tray is lifting during paper feed. • The tray 5 or 6 lift sensor is already activated when tray 5 or 6 is placed in the machine
Causes: • Poor connection or defective tray 5 or 6 lift motor • Poor connection or defective tray 5 or 6 lift sensor • Remaining paper or another obstruction has stopped the tray and motor. • Pick-up solenoid 5 or 6 connector is loose. • Pick-up solenoid 5 or 6 is blocked by an obstruction.
Remedy: 1. Replace the tray 5 or 6 lift motor. 2. Replace the tray 5 or 6 lift sensor. 3. Check or clear obstacles around pick-up solenoid 5 or 6.

Code: 510

Description: Bypass Tray (tray 7) feed error One of the following conditions is detected in the optional bypass tray. • The bypass upper limit sensor is not activated for 10 s after the tray lift motor turned on. • The bypass lower limit sensor is not detected within 10 s while the paper tray is going down after paper feed. • The bypass tray lift sensor is already activated paper is placed in the bypass (tray 7) tray.
Causes: • Poor connection or defective bypass tray lift motor • Poor connection or defective bypass upper limit sensor • Poor connection or defective bypass lower limit sensor • Remaining paper or another obstruction has stopped the tray and motor. • Bypass pick-up solenoid connector is loose. • Bypass pick-up solenoid is blocked by an obstruction.
Remedy: 1. Check the harness connection or replace it. 2. Replace the bypass tray lift motor. 3. Replace the bypass upper limit sensor. 4. Replace the bypass lower limit sensor. 5. Check or clear obstacles around the bypass pick-up solenoid.

Code: 511

Description: A3 LCT exit roller contact motor 1 error. One of the following conditions is detected in the A3 LCT. • The LCT exit roller sensor is not activated within 225 pulses after the LCT exit roller contact motor has turned on at its initialization. • The LCT exit roller sensor detects for 25 pulses even after the LCT exit roller has moved away from its home position. • The LCT exit roller sensor does not detect within 25 pulses after the LCT exit roller has moved back to its home position.
Causes: • Poor connection or defective LCT exit roller contact motor • Poor connection or defective LCT exit roller sensor
Remedy: 1. Check the harness connection. 2. Replace the LCT exit roller contact motor. 3. Replace the LCT exit roller sensor.

Code: 512

Description: A3LCT exit roller contact motor 2 error. One of the following conditions is detected in the A3 LCT. • The LCT exit roller sensor is not activated within 225 pulses after the LCT exit roller contact motor has turned on at its initialization. • The LCT exit roller sensor detects for 25 pulses even after the LCT exit roller has moved away from its home position. • The LCT exit roller sensor does not detect within 25 pulses after the LCT exit roller has moved back to its home position.
Causes: • Poor connection or defective LCT exit roller contact motor • Poor connection or defective LCT exit roller sensor
Remedy: 1. Check the harness connection. 2. Replace the LCT exit roller contact motor. 3. Replace the LCT exit roller sensor.

Code: 520

Description: Registration gate position error The registration gate HP sensor does not detect the registration gate position properly.
Causes: • Defective registration gate lift sensor • Defective registration gate motor • Defective RCB
Remedy: 1. Check the harness connection of the above devices. 2. Replace the registration gate lift sensor. 3. Replace the registration gate motor. 4. Replace the RCB.

Code: 521

Description: Shift roller unit position error The shift roller HP sensor does not detect the shift roller unit position properly.
Causes: • Defective shift roller HP sensor • Defective shift roller unit motor • Defective RCB
Remedy: 1. Check the harness connection of the above devices. 2. Replace the shift roller HP sensor. 3. Replace the shift roller unit motor. 4. Replace the RCB.

Code: 523

Description: Fusing motor lock error • The machine detects a rotation error of the fusing motor for 1 second after the fusing motor has rotated for 1 second. • The machine does not detect any signal from the fusing motor for 1 second when the fusing motor is in the ready condition
Causes: • Fusing oil not circulated in the fusing unit • Overload to the fusing motor • Poor connection or defective LCT exit roller contact motor
Remedy: 1. Check or replace the fusing unit. 2. Check if remaining paper or obstruction in the fusing unit stops the fusing motor drive. 3. Replace the fusing motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie