Description: Delete All error 2: Data area
An error occurred while the machine deleted data from the HDD. Note: The source of this error is the Data Overwrite Security Unit B660 running from an SD card.
Causes: Turn the main switch off/on and try the operation again.
Description: Log data abnormal
An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.
Causes: Software error. Update the firmware. NVRAM defective. HDD defective.
Description: Model information error
The CPM information sent from the controller to the engine immediately after power on did not match the DIP SW settings.
Causes: Engine firmware not installed correctly
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.