Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SP4310N — Trang 3/13

Code: 590

Description: Fan motor error
The machine does not lock for 3sec during rotating the fusing fan motor.
Causes: • Fan motor disconnected, defective • Fan motor harness loose, broken, defective

Code: 591

Description: PSU fan error
The machine does not lock for 3sec during rotating the PSU fan motor.
Causes: • Defective PSU fan

Code: 620

Description: GAVD communication error
The machine detects an error data of the ASIC.
Causes: • Defective engine board • Defective ASIC

Code: 622

Description: Paper tray unit communication error
Three consecutive errors occur during polling, after the paper tray unit is successful I2C communication.
Causes: • Disconnect harnesses

Code: 632

Description: Counter device error 1
After 3 attempts to send a data frame to the optional counter device via the serial communication line, no ACK signal was received within 100 ms.
Causes: • Serial line between the optional counter device, the relay board and copier control board is disconnected or damaged • Make sure that SP5113 is set to enable the optional counter device. 1. Check if the setting of the SP5113 is correctly set. 2. Check the connection between the main machine and optional counter device.

Code: 633

Description: Counter device error 2
After communication is established, the controller receives the brake signal from the accounting device.
Causes: • Serial line between the optional counter device, the relay board and copier control board is disconnected or damaged • Make sure that SP5113 is set to enable the optional counter device. 1. Check if the setting of the SP5113 is correctly set. 2. Check the connection between the main machine and optional counter device.

Code: 634

Description: Counter device error 3
A backup RAM error was returned by the counter device.
Causes: • Counter device control board defective • Backup battery of counter device defective Replace the counter device.

Code: 635

Description: Counter device error 4
A backup battery error was returned by the counter device.
Causes: • Counter device control board defective • Backup battery of counter device defective Replace the counter device.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie