Description: Fusing thermistor error
The fusing temperature did not rise higher than 20°C within 10 sec. after the main motor switched off. -or- The fusing temperature was detected lower than 0oC for over 1 sec. after the power relay switched on.
Description: Fusing temperature warm-up error
Just before reaching warm-up temperature, the fusing temperature did not rise above 80°C within 15.5 sec. after the power relay switched on.
Causes: • Thermistor defective • Fusing lamp open • Fusing thermostat open • Power supply board Defective • Defective connection of the fusing unit
Description: Fusing lamp remains on
The fusing lamp remained on longer than 12 sec. after the fusing unit reached optimum temperature and the main motor switched off.
Causes: • Fusing thermistor defective • Power supply board defective • Defective connection of the fusing unit
Description: Unstable fusing temperature
During standby, the fusing temperature went below 60°C twice or went above 60°C three times within 500 ms. A 60°C increase in fusing temperature was detected at five 1-sec. intervals within 60 sec. before reaching fusing temperature.
Causes: • Fusing thermistor defective • Power supply board defective • Defective connection of the fusing unit
Description: Zero cross signal error
Zero cross signals of wavelength 50-60 Hz were not detected within 5 sec after the fusing relay switched on. -or- Zero cross interrupts did not issue at the prescribed 3 sec. intervals.
Causes: • Power supply board defective • Defective mains power supply condition
Description: Fusing unit jam
Three consecutive paper lag jams (paper failed to arrive) were detected in the fusing unit. -or- During printing of the 1st side during duplexing, the paper did not arrive at the duplex entrance sensor three times.
Causes: • Fusing unit installed incorrectly • Fusing unit defective
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.