Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SP4310N — Trang 12/13

Code: 920

Description: Printer error 1
An internal application error was detected and operation cannot continue.
Causes: • Software defective; turn the machine off/on, or change the controller firmware • Insufficient memory

Code: 921

Description: Printer font error
A necessary font is not found in the SD card. The SD card data is corrupted.
Causes: • Check that the SD card has the correct data

Code: 925

Description: Net file application failure
Causes:

Code: 990

Description: Software error 1
The software performs an unexpected function and the program cannot continue.
Causes: Software defective, re-boot

Code: 991

Description: Software error 2
The software performs an unexpected function. However, unlike SC990, recovery processing allows the program to continue
Causes: Software defective, re-boot

Code: 992

Description: Undefined error
Causes: Defective software program • An error undetectable by any other SC code occurred

Code: 994

Description: Operation Panel Management Records Exceeded
Causes: An error occurred because the number of records exceeded the limit for images managed in the service layer of the firmware. This can occur if there are too many application screens open on the operation panel. No action required because this SC does not interfere with operation of the machine.

Code: 997

Description: Application Selection Error
Causes: An application did not start after pressing the appropriate key on the operation panel. • Software bug; change the firmware for the application that failed • A RAM or DIMM option required by the application is not installed or not installed correctly.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie