Description: HDD mail RX data abnormal An error was detected at power on. The data received during mail receive could be neither read nor written.
Causes: • HDD sector corrupted. Reformat with SP5832 007. If this does not repair the problem, replace the HDD.
Remedy:
Code: 873
Description: HDD mail TX data error An error was detected on the HDD immediately after the machine was turned on, or power was turned off while the machine used the HDD.
Causes: • Do SP5832-8 (Format HDD – Mail TX Data) to initialize the HDD. • Replace the HDD
Remedy:
Code: 874
Description: Delete All error 1: HDD A data error was detected for the HDD/NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit D362 running from an SD card.
Causes: • Turn the main switch off/on, and try the operation again. • Install the Data Overwrite Security Unit again. • HDD defective
Remedy:
Code: 875
Description: Delete All error 2: Data area An error occurred while the machine deleted data from the HDD. Note: The source of this error is the Data Overwrite Security Unit D362 running from an SD card.
Causes: • Turn the main switch off/on, and try the operation again.
Remedy:
Code: 876
Description: Log data abnormal An error was detected in the handling of the log data at power on or during machine operation. This can be caused if you turn the machine off while it is operating.
Description: Data Overwrite Security SD card error The 'all delete' function did not execute but the Data Overwrite Security Unit (D362) is installed and activated.
Causes: • Replace the NVRAM • Reinstall the DOS from the SD card • SD card defective
Remedy:
Code: 878
Description: TPM electronic recognition error The main machine firmware failed to recognize TPM because USB flash is not operating or a system module was updated incorrectly.
Causes: • Replace the controller board
Remedy:
Code: 881
Description: Authentication area error Authentication application error is detected.
Causes: • Error data in an authentication application reaches the management limit.