Causes: -0 Data encryption conversion error • Key acquisition error A serious error occurred during data encryption. 1. Replace the controller board. -1Data encryption conversion error • HDD key setting error A serious error occurred during data encryption. 1. Turn the machine power Off and On. 2. If the error reoccurs, replace the controller board. -2 Data encryption conversion error • NVRAM read/write error A serious error occurred during data encryption. 1. Replace the NVRAM. -30 Data encryption conversion error • NVRAM error A serious error occurred during data encryption. 1. Turn the machine power Off and On. 2. If the error reoccurs, replace the controller board. -31 Data encryption conversion error • Other errors A serious error occurred during data encryption. 1. See SC991.
Causes: -08 HDD check error: The HDD is not correctly installed. • No HDD installed • Unformatted HDD • The encryption key on the controller is different from the one on the HDD • Install the HDD correctly. • Initialize the HDD. -09 Power failure during the data encryption: The data encryption (NVRAM and HDD) has not been completed. Power failure during the data encryption 1. Initialize the HDD. -10 Data read/write error. The DMAC error is detected twice or more. Same as SC863
Description: HDD startup error at main power on HDD is connected but a driver error is detected. The driver does not respond with the status of the HDD within 30 s.
Causes: HDD is not initialized. Level data is corrupted. HDD is defective
Description: HDD re-try failure At power on the HDD was detected. Power supply to the HDD was interrupted after the system entered the energy save mode, but after the HDD was awakened from the energy save mode it did not return to the ready status within 30 sec.
Causes: Harness between HDD and controller board disconnected, defective. HDD power connector disconnected. HDD defective. Controller board defective.
Remedy: 1. Turn the machine power Off and On. 2. Connect the HDD and the Controller board properly. 3. Connect the HDD power connector. 4. Replace the HDD. 5. Replace the controller board.
Description: HDD data CRC error During HDD operation, the HDD cannot respond to an CRC error query. Data transfer did not execute normally while data was being written to the HDD.
Description: SD card error 1: Confirmation The machine detects an electronic license error in the application on the SD card in the controller slot immediately after the machine is turned on. The program on the SD card contains electronic confirmation license data. If the program does not contain this license data, or if the result of the check shows that the license data in the program on the SD card is incorrect, then the checked program cannot execute and this SC code is displayed.
Causes: Program missing from the SD card
Remedy: 1. Download the correct program for the machine to the SD card.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.