• Code: 995
• Description: CPM setting error
• Causes: -01 • Defective BCU • NVRAM Replacement error 1. Install the previous NVRAM. 2. Input the serial number with SP5-811-004, and turn the main power switch off and on. -02 • Defective NVRAM • Defective controller 1. Update the controller firmware. 2. Install a new NVRAM, and turn off and on the main power switch after SC995-002 has occurred. -03 • Incorrect type controller installed • Defective controller 1. Replace the controller with the correct type. -04 • Incorrect model controller installed. 1. Replace the controller with the correct model.
• Remedy:

• Code: 998
• Description: Application start error
  No applications start within 60 sec. after the power is turned on.
• Causes: Loose connection of RAM-DIMM, ROM-DIMM. Software problem. Controller board defective.
• Remedy: 1. Check the setting of SP5875-001. If the setting is set to "1 (OFF)", change it to "0 (OFF)". 2. Connect the RAM-DIMM, ROM-DIMM correctly. 3. Reinstall the controller system firmware. 4. Replace the controller board.