• Code: 761
• Description: Finisher folder plate motor error
  The folder plate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Folder plate HP sensor disconnected, defective • Folder plate motor disconnected, defective • Folder plate motor overloaded due to obstruction.

• Code: 762
• Description: Finisher pressure plate motor error
  Pressure plate motor operating but the plate is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Pressure plate HP sensor disconnected, defective • Pressure plate motor disconnected, defective • Pressure plate motor overloaded due to obstruction

• Code: 763
• Description: Punch movement motor error
  Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective • Motor defective

• Code: 764
• Description: Paper position sensor slide motor error
  Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective • Motor defective

• Code: 765
• Description: Folding unit bottom fence lift motor
  The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective • Motor defective

• Code: 766
• Description: Clamp roller retraction motor error
  The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective • Motor defective

• Code: 767
• Description: Stack junction gate motor error
  Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Motor harness disconnected, loose, defective • Motor overload • Motor defective

• Code: 770
• Description: Cover interposer tray bottom plate motor error
  After the motor starts to raise the bottom plate, the bottom plate position sensor does not detect the plate at the specified time (3 s). After the motor starts to lower the bottom plate, the bottom plate HP sensor does not detect the bottom plate.
• Causes: • Bottom plate position sensor, disconnected, defective • Bottom plate HP sensor disconnected, defective